Sam S wrote:
>
> "Lem" wrote:
>
>
>>Sam S wrote:
>>
>>>I have a secure wireless network at home using a Dell router. When I visit
>>>my parent, they have a Belkan router that is currently unsecured. First, I
>>>visit once a month for 3-4 days, Is it worth securing it?
>>
>>Yes. Don't you think your parent's system is as worth protecting as
>>your own?
>>
>>Second, and most
>>
>>>important, is if I secure the network at my parents, will I screw up anything
>>>when i return home? Thank you.
>>
>>No. If you have set things up properly, your home network will have an
>>unique SSID of, say, "SamsNet" and your parents' network will have a
>>unique SSID of, say, "OldFolksNet". When you search for "available
>>networks" and pick one to connect to, you will be asked to enter the
>>appropriate encryption key. Each key is "remembered" in association
>>with its corresponding SSID, so when you go home, you'll automatically
>>connect to SamsNet.
>
>
> Thanks Lem:
>
> I think I phrased my question incorrectly and didn'trovide all info. But
> you answered it completely.
>
> I need to point out that my parents PC is not wireless. It is hooked into
> the router. Does that change your #1 answer? Is there a link that would
> show me how to secure my network correctly thru a good link that might
> address my specific issue or close to it?. Excuse the ignorance, I don't
> understand Ecncryption code. Thank you.
>
>>
If your parents' PC dies not use wireless AND if their router is not a
wireless router, they they are pretty secure already. If they have a
wireless-capable router and are just not using that capability (most
home wifi routers have connections for up to 4 computers to connect
using Ethernet cable) they should disable the wifi part of the router.
How you do that depends on the particular router. On my Linksys WRT54G,
it's on the "Basic Wireless Settings" screen, where I can set the
"Wireless Network Mode" to G-Only, B-Only, Mixed, or Disabled.
Other than that, the only other things I would suggest to secure your
parents' network is to change the password used to access the router's
configuration utility to something other than the default, and to
double-check that "remote management" of the router is turned off.
As to your other question, are you asking how to secure your own wifi
network? In your original post, you said it was already secure. I'm
not sure what your asking about. If it's wifi encryption/security, read
on. Otherwise, you'll have to be a bit clearer.
Because wifi signals, like all radio signals, can be picked up by anyone
with an appropriate receiver, wifi is secured by encrypting the signals.
There are 3 general levels of encryption available to home users, in
increasing order of security: WEP, WPA, and WPA2. All the nodes on the
network must use the same level. Use the highest level you can. See
http://www.ezlan.net/Wireless_Security.html and
http://www.ezlan.net/wpa_wep.html
For further detail see:
Implement WPA2-Personal wireless security on a Windows XP SP2-based computer
http://www.microsoft.com/windowsxp/u...ssecurity.mspx
WPA Wireless Security for Home Networks
http://www.microsoft.com/windowsxp/u..._03july28.mspx
Improve the security of your wireless home network with Windows XP
http://www.microsoft.com/windowsxp/u.../wireless.mspx
Expert Zone Support Webcast: How to set up WPA-based wireless security
on a home network:
http://support.microsoft.com/?kbid=895616