RRAS as VPN server question

windows server 2000. 1 nic (192.168.2.2). can i configure RRAS to act as a
VPN server with only this 1 nic? if so, will i need a static route on the
interface some how? when i go to configure RRAS via the wizard, i choose vpn
server and i am asked to choose a nic. i have 2 choices: 1 is the only nic
in the machine, the other choice says <no internet connection>. if i choose
the nic i cannot proceed. if i choose no internet connection i can proceed
but im not sure if this will work. thank you!

Do not use the VPN server option in the wizard. Configure the server as a
remote access server or use manual config. You can then make a local VPN
connection from a LAN machine to test the setup.

<(E-Mail Removed)> wrote in message
news:4Q0bc.15530$(E-Mail Removed) et...
> windows server 2000. 1 nic (192.168.2.2). can i configure RRAS to act as a
> VPN server with only this 1 nic? if so, will i need a static route on the
> interface some how? when i go to configure RRAS via the wizard, i choose
vpn
> server and i am asked to choose a nic. i have 2 choices: 1 is the only nic
> in the machine, the other choice says <no internet connection>. if i
choose
> the nic i cannot proceed. if i choose no internet connection i can proceed
> but im not sure if this will work. thank you!
>
>

so then let me rephrase: can i setup RRAS to accept incoming vpn
connections, AND have that vpn connection provide access to the LAN with
only one nic? and if so, where do i need a static route?


"Bill Grant" <not.available@online> wrote in message
news:(E-Mail Removed)...
> Do not use the VPN server option in the wizard. Configure the server as
a
> remote access server or use manual config. You can then make a local VPN
> connection from a LAN machine to test the setup.
>
> <(E-Mail Removed)> wrote in message
> news:4Q0bc.15530$(E-Mail Removed) et...
> > windows server 2000. 1 nic (192.168.2.2). can i configure RRAS to act as
a
> > VPN server with only this 1 nic? if so, will i need a static route on
the
> > interface some how? when i go to configure RRAS via the wizard, i choose
> vpn
> > server and i am asked to choose a nic. i have 2 choices: 1 is the only
nic
> > in the machine, the other choice says <no internet connection>. if i
> choose
> > the nic i cannot proceed. if i choose no internet connection i can
proceed
> > but im not sure if this will work. thank you!
> >
> >
>
>