we need more informtion to help. for example, posting the routing table may help.
For more and other information, go to
http://howtonetworking.com.
Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help.
Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on
http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
"Ricky M" <(E-Mail Removed)> wrote in message news:89A4B15C-AF72-4569-AC88-(E-Mail Removed)...
I am trying to set up static routes using RRAS on windows 2003 server. I have
2 NIC cards installed and an IBM NetXtreme T1000 Load Balancing NIC card. I
am attempting to make all internal traffic go through the 2 NIC cards to the
Load Balancing card. The load balancing card will be used to connect the
server to the internet.
I am trying to implement this as i believe it would make Traffic Monitoring
for 2 seperate networks.
1st NIC 192.168.2.0 network
2nd NIC 192.168.5.0 network
the load balancing NIC networks don't matter as there will be routers
inbetween the Load balancing NIC and the internet
Left LB NIC goes to router then ADSL
Right LB NIC goes to router then Supernet.
I've looked at the help in the RRAS but i don't seem to be getting the NIC/
destination and gateway working right.
Any suggestions?
Similar Threads
Linear Mode
