Networking Forums

Networking Forums > Wireless Networking > Wireless Networks > Router power consumption

Reply
Thread Tools Display Modes

Router power consumption

 
 
ML
Guest
Posts: n/a

 
      07-05-2008, 03:50 AM
Is the signal strength of a router depends on the router's power consumption?
To compare a router that uses 3.3V and one that uses 12V. Does this mean
that the 12V one can give stronger signal and support more wireless clients?

Tks.
 
Reply With Quote
 
 
 
 
Jack \(MVP-Networking\).
Guest
Posts: n/a

 
      07-05-2008, 04:30 PM
Hi
The DC power supply voltage has noting to do with the RF output.
The RF output is rated in mW (milliWatts). The typical RF output of almost
all the Entry Level Wireless Devices is about 33mW regardless of their power
supply rating.
There are more expensive devices that are rated as High Power, and provide
up to 100mW.
Number of clients has to do more with the Bandwidth than the power.
May be this can further help.
..Extending Distance - http://www.ezlan.net/Distance.html
Wireless Router as an Access Point - http://www.ezlan.net/router_AP.html
Wireless Modes - http://www.ezlan.net/Wireless_Modes.html
Wireless Bridging - http://www.ezlan.net/bridging.html
Hi Gain Antenna - http://www.ezlan.net/antennae.html
Network Bandwidth (Speed) - http://www.ezlan.net/net_speed.html
How many concurrent users can surf the Internet through the same Wireless
Connection - http://www.ezlan.net/faq.html#wconcurrent
Jack (MVP-Networking).


"ML" <(E-Mail Removed)> wrote in message
news:AB52CDC6-20D5-449C-A61E-(E-Mail Removed)...
> Is the signal strength of a router depends on the router's power
> consumption?
> To compare a router that uses 3.3V and one that uses 12V. Does this mean
> that the 12V one can give stronger signal and support more wireless
> clients?
>
> Tks.


 
Reply With Quote
 
ML
Guest
Posts: n/a

 
      07-06-2008, 02:52 AM
Hello

So it is okay to attach a 5dBi antenna to this router that uses 3.3V?
Would the router able to support it since it is using such low power
consumption?
I need to confirm this with the experts.

Tks.

"Jack (MVP-Networking)." wrote:

> Hi
> The DC power supply voltage has noting to do with the RF output.
> The RF output is rated in mW (milliWatts). The typical RF output of almost
> all the Entry Level Wireless Devices is about 33mW regardless of their power
> supply rating.
> There are more expensive devices that are rated as High Power, and provide
> up to 100mW.
> Number of clients has to do more with the Bandwidth than the power.
> May be this can further help.
> ..Extending Distance - http://www.ezlan.net/Distance.html
> Wireless Router as an Access Point - http://www.ezlan.net/router_AP.html
> Wireless Modes - http://www.ezlan.net/Wireless_Modes.html
> Wireless Bridging - http://www.ezlan.net/bridging.html
> Hi Gain Antenna - http://www.ezlan.net/antennae.html
> Network Bandwidth (Speed) - http://www.ezlan.net/net_speed.html
> How many concurrent users can surf the Internet through the same Wireless
> Connection - http://www.ezlan.net/faq.html#wconcurrent
> Jack (MVP-Networking).
>



 
Reply With Quote
 
Jack \(MVP-Networking\).
Guest
Posts: n/a

 
      07-06-2008, 06:06 PM
Hi
Yeah, it very good idea to attach better Antenna.
3.3V is the voltage Not the power. The power is W = I X V (Watt= 1A x
1Volt).
An electrical device that uses 3.3V and source 1 A provides Power of
3.3Watts.
An electrical device that uses 6.6V and source .5 A provides Power of
3.3Watts.
I.e. Different Voltage, but both devices provide the same power. The choice
of the Voltage is a design choice and Not a direct issue of Power.
Jack (MVP-Networking).

"ML" <(E-Mail Removed)> wrote in message
news4BA7A92-5A05-45E4-9580-(E-Mail Removed)...
> Hello
>
> So it is okay to attach a 5dBi antenna to this router that uses 3.3V?
> Would the router able to support it since it is using such low power
> consumption?
> I need to confirm this with the experts.
>
> Tks.
>
> "Jack (MVP-Networking)." wrote:
>
>> Hi
>> The DC power supply voltage has noting to do with the RF output.
>> The RF output is rated in mW (milliWatts). The typical RF output of
>> almost
>> all the Entry Level Wireless Devices is about 33mW regardless of their
>> power
>> supply rating.
>> There are more expensive devices that are rated as High Power, and
>> provide
>> up to 100mW.
>> Number of clients has to do more with the Bandwidth than the power.
>> May be this can further help.
>> ..Extending Distance - http://www.ezlan.net/Distance.html
>> Wireless Router as an Access Point - http://www.ezlan.net/router_AP.html
>> Wireless Modes - http://www.ezlan.net/Wireless_Modes.html
>> Wireless Bridging - http://www.ezlan.net/bridging.html
>> Hi Gain Antenna - http://www.ezlan.net/antennae.html
>> Network Bandwidth (Speed) - http://www.ezlan.net/net_speed.html
>> How many concurrent users can surf the Internet through the same Wireless
>> Connection - http://www.ezlan.net/faq.html#wconcurrent
>> Jack (MVP-Networking).
>>

>
>


 
Reply With Quote
 
Phillip Windell
Guest
Posts: n/a

 
      07-07-2008, 02:29 PM
Output power is regulated by the FCC in the US. I'm sure there are other
"entities" that regulate them in other countries.

The "gain" of an antenna is the ability of the antenna itself to improve
efficiency all by itself with the existing power it is already given.
Yes,..you can use the antenna, but as some others have mentioned it may be
"directional".

--
Phillip Windell
www.wandtv.com

The views expressed, are my own and not those of my employer, or Microsoft,
or anyone else associated with me, including my cats.
-----------------------------------------------------

"ML" <(E-Mail Removed)> wrote in message
news4BA7A92-5A05-45E4-9580-(E-Mail Removed)...
> Hello
>
> So it is okay to attach a 5dBi antenna to this router that uses 3.3V?
> Would the router able to support it since it is using such low power
> consumption?
> I need to confirm this with the experts.
>
> Tks.
>
> "Jack (MVP-Networking)." wrote:
>
>> Hi
>> The DC power supply voltage has noting to do with the RF output.
>> The RF output is rated in mW (milliWatts). The typical RF output of
>> almost
>> all the Entry Level Wireless Devices is about 33mW regardless of their
>> power
>> supply rating.
>> There are more expensive devices that are rated as High Power, and
>> provide
>> up to 100mW.
>> Number of clients has to do more with the Bandwidth than the power.
>> May be this can further help.
>> ..Extending Distance - http://www.ezlan.net/Distance.html
>> Wireless Router as an Access Point - http://www.ezlan.net/router_AP.html
>> Wireless Modes - http://www.ezlan.net/Wireless_Modes.html
>> Wireless Bridging - http://www.ezlan.net/bridging.html
>> Hi Gain Antenna - http://www.ezlan.net/antennae.html
>> Network Bandwidth (Speed) - http://www.ezlan.net/net_speed.html
>> How many concurrent users can surf the Internet through the same Wireless
>> Connection - http://www.ezlan.net/faq.html#wconcurrent
>> Jack (MVP-Networking).
>>

>
>



 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
ADSL router power consumption BluntChisel Broadband 23 03-22-2011 09:54 AM
Calculating power consumption... ericm0009@yahoo.com Wireless Internet 6 09-24-2008 02:06 PM
WiMax power consumption Ginu Wireless Internet 1 08-04-2008 08:58 PM
Power consumption PCI vs. mini-PCI Geir Wireless Internet 1 10-12-2007 12:32 AM
power consumption Dan Irwin Wireless Internet 4 08-27-2004 09:27 PM



1 2 3 4 5 6 7 8 9 10 11