Never mind, I got it working Monday morning
Thanks
"Darwin" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Not sure how to explain this.
>
> In building 1, I have a computer hooked to a Linksys AP (WAP54g). This is
> located in the attic with the leftside antenna enabled to an outside
> antenna.
>
> In building 2 approx. 2 blocks away, I have a computer hooked to a Linksys
> (BEFSR41) router that is hooked to another Linksys AP (WAP54g) which is
> located in the 4th floor with its right antenna enabled to an outside
> antenna (line of sight to the other outside antenna).
>
> One weird thing, I can't hook the AP directly to the computer in building
> 2, The computer can't find it. But when I hook the router first and then
> the AP to the router I can access the AP admin settings. This is the only
> reason for using the router. Why can't the computer find the AP alone but
> can find the Router alone? It use to work with just the AP to the
> computer.
>
> In building 2, I have the computer hooked to one of the four ports on the
> router, and then the AP hooked to one of the 4 ports on the router. If I
> try and use the WAN or UPLINK plugins, I am unable to access the ADMIN
> setting on either one.
>
> Building 1 AP = 192.168.1.246
> Building 2 AP = 192.168.1.245
> Building 2 Router = 192.168.1.247
>
> Any idea what setting I would need to get the AP's in building 1 and 2 to
> talk with each other. I am able to ping router and AP in building 2 but
> can't ping from one building to the other.
>
>
>
|
Linear Mode
