On Mon, 13 Dec 2004 07:53:04 GMT, E Brown <(E-Mail Removed)>
wrote:
>On Sun, 12 Dec 2004 15:43:18 -0800, Jeff Liebermann
><(E-Mail Removed)> wrote:
>>No problems. You must have SBC/Ameritech/AT&T DSL. The reason they
>>want you to leave the modem on for 10 days is that they test the
>>performance and reliability of the line and modem during this period.
> Thanks, I do have SBC. I've got some old modem, from the look of
>it, but don't recall the model. If I didn't already have the D-Link,
>I'd buy a 2nd-hand wifi modem - I seem them around for $80 or so now.
>My current set-up works and if it ain't broke...
> Emanuel
SBC didn't start using the messy red "10 day" sticker until about 2
years ago when they switched from Alcatel to Efficient modems. It's
probably an Efficient 5100B which is not ancient, works quite nicely,
but is somewhat crippled in diagnostics.
I would strongly suggest you *NOT* purchase an all in one box (DSL
modem, router, and wireless). Each box wants to be located somewhere
else. The DSL modem wants to live near the demarc (MPOE) to keep the
interior wiring to a minimum. The router wants to live on the floor
where all the CAT5 wires come together. The wireless wants to live up
high on a bookshelf for better coverage. Seperate boxes also allow
you some versatility in replacing parts and pieces, such as adding a
VPN terminating router, latest wireless standards (802.11i), or
switching from DSL to cable. Were it an all in one box, you would
need to toss everything and start over. Also, seperate boxes are
easier to troubleshoot by replacement when something goes wrong, goes
wrong, goes wrong, goes wrong, goes wrong...
--
Jeff Liebermann
(E-Mail Removed)
150 Felker St #D
http://www.LearnByDestroying.com
Santa Cruz CA 95060 AE6KS 831-336-2558