route to modem for web admin

Hi,

I have a network at home that uses a linux gateway for the internet. I am
using my modem as a bridged modem with raspppoe on the linux box as shown
below:

eth0
eth1
static ip
192.168.0.1
202.x.x.x
internet -------- bridged -------------- linux gateway -------------
internal lan
modem
(192.168.1.1)


my question is is there a way i set the route or iptable rule so that i can
bring up a browser on my linux gateway and punch in 192.168.1.1 to access
the modems web admin. I have tried many things but nothing seems to work.

Thanks,

Mike

"Michael Mai" <(E-Mail Removed)> wrote in message news:<401701e0$0$10523$(E-Mail Removed). com.au>...
> Hi,
>
> I have a network at home that uses a linux gateway for the internet. I am
> using my modem as a bridged modem with raspppoe on the linux box as shown
> below:
>
> eth0
> eth1
> static ip
> 192.168.0.1
> 202.x.x.x
> internet -------- bridged -------------- linux gateway -------------
> internal lan
> modem
> (192.168.1.1)
>
>
> my question is is there a way i set the route or iptable rule so that i can
> bring up a browser on my linux gateway and punch in 192.168.1.1 to access
> the modems web admin. I have tried many things but nothing seems to work.
>
> Thanks,
>
> Mike

Not sure what you are after, but if it has to do with (cable) modem
access, you probably need something like this:
http://192.168.100.1/startup.html <- Motorola site for Surboards (and
others)
Not sure what the dsl modems are using.

Not aware that any of the modems actually have a "built-in" web
interface.
Also try here if your looking to get at the "insides" to diagnose
something:
http://www.tcniso.net/ <- useful for cable modems

hth,
prg
email above disabled