Restore server from NAS

Hi
I would like to restore server 2008 standard from backup on NAS.
The problem is, that server asks for IP expect IP address from DHCP server.
I tried to use netsh command to assign IP address manually. I have got
message - unknown interface name.
Can anybody tell me how to assign IP address in the same range as NAS?
JN

JN <(E-Mail Removed)> wrote:
> Hi
> I would like to restore server 2008 standard from backup on NAS.
> The problem is, that server asks for IP expect IP address from DHCP
> server. I tried to use netsh command to assign IP address manually. I
> have got message - unknown interface name.
> Can anybody tell me how to assign IP address in the same range as NAS?
> JN

I'm confused. What are you restoring *from* and how?

I made backup on NAS (networ attached storage) via network. Than In run setup
from installation CD and choosed Repair installation. To connect NAS via
network I need to assign IP address to servers network card. I do that by
Netsh command. The command retur message interface name not recognized. I use
czech localization of Windwos server that use czech letters in the name of
interface.



"Lanwench [MVP - Exchange]" wrote:

> JN <(E-Mail Removed)> wrote:
> > Hi
> > I would like to restore server 2008 standard from backup on NAS.
> > The problem is, that server asks for IP expect IP address from DHCP
> > server. I tried to use netsh command to assign IP address manually. I
> > have got message - unknown interface name.
> > Can anybody tell me how to assign IP address in the same range as NAS?
> > JN
>
> I'm confused. What are you restoring *from* and how?
>
>
>

JN <(E-Mail Removed)> wrote:
> I made backup on NAS (networ attached storage) via network.

What kind of backup? Windows backup?

> Than In
> run setup from installation CD and choosed Repair installation. To
> connect NAS via network I need to assign IP address to servers
> network card. I do that by Netsh command. The command retur message
> interface name not recognized. I use czech localization of Windwos
> server that use czech letters in the name of interface.

Ah. Never tried that. Presuming this is the built-in Windows backup see
http://blogs.technet.com/askcore/arc...-location.aspx


>
>
>
> "Lanwench [MVP - Exchange]" wrote:
>
>> JN <(E-Mail Removed)> wrote:
>>> Hi
>>> I would like to restore server 2008 standard from backup on NAS.
>>> The problem is, that server asks for IP expect IP address from DHCP
>>> server. I tried to use netsh command to assign IP address manually.
>>> I have got message - unknown interface name.
>>> Can anybody tell me how to assign IP address in the same range as
>>> NAS? JN
>>
>> I'm confused. What are you restoring *from* and how?

Yes I use Windows backup
I think it would help to rename network interface not to have chech lettrs.
I am going to try .

"Lanwench [MVP - Exchange]" wrote:

> JN <(E-Mail Removed)> wrote:
> > I made backup on NAS (networ attached storage) via network.
>
> What kind of backup? Windows backup?
>
> > Than In
> > run setup from installation CD and choosed Repair installation. To
> > connect NAS via network I need to assign IP address to servers
> > network card. I do that by Netsh command. The command retur message
> > interface name not recognized. I use czech localization of Windwos
> > server that use czech letters in the name of interface.
>
> Ah. Never tried that. Presuming this is the built-in Windows backup see
> http://blogs.technet.com/askcore/arc...-location.aspx
>
>
> >
> >
> >
> > "Lanwench [MVP - Exchange]" wrote:
> >
> >> JN <(E-Mail Removed)> wrote:
> >>> Hi
> >>> I would like to restore server 2008 standard from backup on NAS.
> >>> The problem is, that server asks for IP expect IP address from DHCP
> >>> server. I tried to use netsh command to assign IP address manually.
> >>> I have got message - unknown interface name.
> >>> Can anybody tell me how to assign IP address in the same range as
> >>> NAS? JN
> >>
> >> I'm confused. What are you restoring *from* and how?
>
>
>
>