reset button on linksys router broke off. Cant find ip it is set at .

reset button on linksys router broke off. Cant find ip it is set at .
It is working routing traffic, But I cant find web interface for it
Is there anyway to resolve IP using MAC ?
any ideas?

I think the default inside IP address is 192.168.1.1
Try it.

If not, do you have a manual?
If not, look on the Linksys web site.

--
Bob Alston

bobalston9 AT aol DOT com
"Yea" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> reset button on linksys router broke off. Cant find ip it is set at .
> It is working routing traffic, But I cant find web interface for it
> Is there anyway to resolve IP using MAC ?
> any ideas?
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.772 / Virus Database: 519 - Release Date: 10/1/2004

On Mon, 04 Oct 2004 13:51:20 -0400, Yea spoketh

>reset button on linksys router broke off. Cant find ip it is set at .
>It is working routing traffic, But I cant find web interface for it
>Is there anyway to resolve IP using MAC ?
>any ideas?

If it's been reset, and you're using DHCP, then the IP address of the
DHCP server listed when doing an "ipconfig /all" would be the IP address
of the router. If it actually routes traffic between you and the
internet, it would also be the "default gateway" listed when doing an
"ipconfig /all".

Lars M. Hansen
http://www.hansenonline.net
(replace 'badnews' with 'news' in e-mail address)

Yea <(E-Mail Removed)> wrote:
>reset button on linksys router broke off. Cant find ip it is set at .
>It is working routing traffic, But I cant find web interface for it

Are you sure it's broken off? The button is a little tiny thing far
back behind the hole....

Hook up a computer, open a DOS prompt, say "ipconfig/all" and see what
your gateway is, and use that in your browser to find the Web
interface.

Maybe you have similar problem to mine?

Look in google.com or on this news group by topic "Linksys BEFW11S4 is dead
after changing the WEP key".



Mark

On Mon, 04 Oct 2004 13:51:20 -0400, Yea <(E-Mail Removed)> wrote:

>reset button on linksys router broke off. Cant find ip it is set at .
>It is working routing traffic, But I cant find web interface for it
>Is there anyway to resolve IP using MAC ?
>any ideas?

Try 192.168.1.1 If that doesn't work, open up the router and apply a
paper clip to the contacts on what remains of the switch. Remove the
black rubber feet from the bottom of the router. There are some
screws underneath. Remove those. The box should come apart. You'll
need to hold the paper clip on the contacts for about 15-30 seconds to
do an effective reset. The reset switches are commonly available from
Digikey or Mouser but some expertise will be required to do the
soldering. After you replace the switch, I suggest you abandon the
hammer and nail method of depressing the reset button, and use
something less destructive, such as a toothpick or paper clip.

--
Jeff Liebermann (E-Mail Removed)
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 AE6KS 831-336-2558