Networking Forums

Networking Forums > Wireless Networking > Wireless Internet > Recommendation of outdoor antennas

Reply
Thread Tools Display Modes

Recommendation of outdoor antennas

 
 
Jerry Kurata
Guest
Posts: n/a

 
      10-24-2004, 04:18 PM
HI,

We are connecting two buildings about 200 feet apart. We will be using 2.4
Ghz. Does anyone have any suggestions about the type of antennas to use?
Low cost is important, but not if the solution does not work well.

Thanks,

Jerry


 
Reply With Quote
 
 
 
 
Airhead
Guest
Posts: n/a

 
      10-24-2004, 05:17 PM
200 feet is not much. If you want the antennas to only radiate towards each
building then use a directional type
patch antenna with about a 45 to 60 degree beam more or less. If you dont
mind if the signal radiates in all directions then you can go with an
omnidirectional. Its not going to take much gain for 200 foot, you could
probably do ok with 2 stock Access Points. You need to have a clear Line of
site for best signal.



rry Kurata" <(E-Mail Removed)> wrote in message
news:GBQed.416895$mD.184384@attbi_s02...
> HI,
>
> We are connecting two buildings about 200 feet apart. We will be using

2.4
> Ghz. Does anyone have any suggestions about the type of antennas to use?
> Low cost is important, but not if the solution does not work well.
>
> Thanks,
>
> Jerry
>
>



 
Reply With Quote
 
John .
Guest
Posts: n/a

 
      10-24-2004, 06:05 PM
"Jerry Kurata" <(E-Mail Removed)> wrote:
>We are connecting two buildings about 200 feet apart. We will be using 2.4
>Ghz. Does anyone have any suggestions about the type of antennas to use?
>Low cost is important, but not if the solution does not work well.
>
>Thanks,
>
>Jerry


I just installed a pair of these flat panel patch antennas in a
similar environment (100 ft apart for ours)which I am very happy with:

http://www.sharperconcepts.net/produ...products_id=49

 
Reply With Quote
 
Jeff Liebermann
Guest
Posts: n/a

 
      10-24-2004, 07:46 PM
On Sun, 24 Oct 2004 16:18:47 GMT, "Jerry Kurata" <(E-Mail Removed)>
wrote:

>We are connecting two buildings about 200 feet apart. We will be using 2.4
>Ghz. Does anyone have any suggestions about the type of antennas to use?
>Low cost is important, but not if the solution does not work well.


At 200ft, almost any type of directional antenna will work. This
sounds like a commercial adventure, so I won't recommend any do it
thyself antennas. If you are impoverished, methinks an 8dBi panel
(patch) antenna is sufficient. I like Maxrad 9 ($25), 13 ($35), or
18dBi ($60) antennas because of the ease of mounting (swivel ball with
a hose clamp to a vertical pipe). If you're into 802.11g type
performance, your main concern will be to insure that you have a very
strong signal, with little interference from other co-channel users
located to the sides of the antenna pattern. If this is a tall
building, that has the potential to see other co-channel users, I
would make some effort to block the signal from other directions with
something absorbant (not reflective). Therefore, I would NOT suggest
you use an omni or yagi, but instead use a panel (patch) or dish
antenna. I can run a fade margin calculation to determine the minimum
required gain, but I need to know what you're working with, how long
the coax run, type of coax, expected speed, etc.
http://www.fab-corp.com/J1.htm

--
Jeff Liebermann (E-Mail Removed)
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 AE6KS 831-336-2558
 
Reply With Quote
 
Jeff Liebermann
Guest
Posts: n/a

 
      10-24-2004, 08:02 PM
On Sun, 24 Oct 2004 12:46:13 -0700, Jeff Liebermann
<(E-Mail Removed)> wrote:

>This
>sounds like a commercial adventure, so I won't recommend any do it
>thyself antennas.


I can't resist.

Build your own biquad panel:
http://www.frars.org.uk/cgi-bin/rend...=link&url=1162
http://www.frars.org.uk/cgi-bin/rend...=link&url=1064
http://martybugs.net/wireless/biquad/
http://reseaucitoyen.be/?BiQuad
http://www.trevormarshall.com/biquad.htm

This article shows the WRONG way to build a biquad. I threw it in
because I've seen too many people build it this way and wonder why it
doesn't work.
http://www.geocities.com/lincomatic/...nt.html#biquad
The other antennas on this page appear to be correct.

Or, build your own panel (patch) antenna:
http://devices.planet-wireless.de/comtelco/index.html
http://www.geocities.com/lincomatic/homebrewant.html
http://www.rc-cam.com/gp_patch.htm

See section on "2.4 Ghz home made" antennas for additional links:
http://qdg.sorbs.net/qdgant.htm

Ah, now I feel better...


--
Jeff Liebermann (E-Mail Removed)
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 AE6KS 831-336-2558
 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Recommend me an outdoor AP nz666 Wireless Internet 4 10-24-2007 08:14 PM
Low cost WIfi antennas, and 1000mw usb outdoor antenna usb Luca Wireless Internet 2 12-12-2006 07:17 AM
Outdoor antennas from 18 euros Luca Wireless Internet 0 08-19-2006 04:04 PM
WRT54G Linksys default antennas replace with 7 dbi antennas Bryce Wireless Internet 4 05-10-2005 07:31 AM
Outdoor Wireless Antennas James Collins Wireless Internet 11 11-04-2004 01:04 PM



1 2 3 4 5 6 7 8 9 10 11