Re: Netgear Router and Network errors!!

Hi.
I have a Netgear WGT 624 Router that has 3 wired pcs connected to it. It
has worked without poblem for months. Recently the connections were lost, so
I reset everything only to find that 2 pcs will connect fine, but as soon as
the 3rd pc is connected I get a "network cable has been unplugged" error on
all 3 pcs. Shortly after they will all then show as reconnected but when
they do I cannot gain access to the internet or the router setup page on any
of the pcs. If I then remove the cable from the 3rd pc and resest everything
hey presto 2 working pcs. Anyone got any ideas?

Thanks
Colin

"Colin G." <saddler@(nospam)blueyonder.co.uk> wrote in
news:ybgUg.62690$(E-Mail Removed) k:

> Hi.
> I have a Netgear WGT 624 Router that has 3 wired pcs connected to
> it. It
> has worked without poblem for months. Recently the connections were
> lost, so I reset everything only to find that 2 pcs will connect fine,
> but as soon as the 3rd pc is connected I get a "network cable has been
> unplugged" error on all 3 pcs. Shortly after they will all then show
> as reconnected but when they do I cannot gain access to the internet
> or the router setup page on any of the pcs. If I then remove the cable
> from the 3rd pc and resest everything hey presto 2 working pcs. Anyone
> got any ideas?
>
> Thanks
> Colin
>
>
>

Hi Colin!

Try reloading the firmware.

Try swithching/replacing cables.

Unit could be faulty though.

ES