Re: Netgear MR814v2 as Access Point Only

You would have to change the mr814v2's ip address to somthing in 192.168.1.X
as it has to be in the same subnet as everything else. Since your laptop is
also in the 192.168.1.X range. Make sure that dhcp on the wireless router is
turned off if you are using you linksys as a router. As two routers trying
to assign ip addresses is not exactly a good thing.
"Bruce" <(E-Mail Removed)> wrote in message
news:sT23b.8842$QT5.1013@fed1read02...
> Hi and Thanks in Advance
> Here is the scenario I have a wired LAN with a Linsys Router and switch
> setup and I had recently aquired a Netgear MR814v2 Wireless router and I
got
> it working as a access point to internet and it works great, but when I
want
> to admin for the wireless setup I can't unless I change my Laptops IP to
> same subnet as the router (192.168.0.2 for the laptop) then admin works
> great but Internet access goes away. Any help would be great and what IP
do
> I have to change ? Laptop or wireless Router and to what (Linky is on
> 192.168.1.1)
>
> Thanks Bruce
>
>
> ---
> Outgoing mail is certified Virus Free.
>
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.512 / Virus Database: 309 - Release Date: 8/19/2003
>
>