Networking Forums

Networking Forums > Network Hardware > Home Networking > Re: Can't access router config.

Reply
Thread Tools Display Modes

Re: Can't access router config.

 
 
David Perry
Guest
Posts: n/a

 
      11-26-2009, 08:43 PM

"Geoff Mills" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Hi, I recently removed my Belkin F5D7630uk4A router from my home
> network where Plusnet had been supplying the WLAN connection.
> This was exchanged for a Huawei HG520b with TalkTalk supplying the
> WLAN connection. It works fine.
>
> I want to use my currently isolated 4 port Belkin router as a switch,
> so I connected it to my laptop with a patch cable (tried a variety)
> and entered http://192.168.2.1 into the browser. Nothing came up.
> Did a hard reset to factory default of router, still nothing.
> Can anyone please tell me what I'm doing wrong?
> --
> Kind regards,
> Geoff Mills


The router you are trying to access has the DHCP server switched off,
so it doesn't know what to do with your request. I have one router
hooked up to the phone line and another connected via a network
cable - that second router has DHCP switched off. Once switched off
it allows devices to connect on that SSID by wireless or via the
network port on the back. It routes everything to the first router.
I can however connect to the main router on the phoneline!
I would reset the router you are having trouble with and also make sure
you are using the correct address to access it.


 
Reply With Quote
 
 
 
 
Adrian C
Guest
Posts: n/a

 
      11-26-2009, 09:16 PM
David Perry wrote:
> "Geoff Mills" <(E-Mail Removed)> wrote in message
>
> The router you are trying to access has the DHCP server switched off,


Geoff,

Before you reply, this poster is the Tiscali Idiot previously known as
Roger, and has intentionally offended you in the past :-(

Ignore it.

--
Adrian C
 
Reply With Quote
 
Rob Morley
Guest
Posts: n/a

 
      11-26-2009, 10:05 PM
On Thu, 26 Nov 2009 21:16:09 +0000
Adrian C <(E-Mail Removed)> wrote:

> David Perry wrote:
> > "Geoff Mills" <(E-Mail Removed)> wrote in message
> >
> > The router you are trying to access has the DHCP server switched
> > off,

>
> Geoff,
>
> Before you reply, this poster is the Tiscali Idiot previously known
> as Roger, and has intentionally offended you in the past :-(


And is posting its usual brand of total bollocks.
>
> Ignore it.
>

Unless you can figure out how to kill it ...

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Re: Can't access router config. Jon Home Networking 4 11-29-2009 12:29 PM
Re: Can't access router config. Rob Morley Home Networking 0 11-27-2009 07:00 AM
Re: Can't access router config. Ian Northeast Home Networking 0 11-26-2009 04:20 PM
pc to router to access point issue trying to see pc on other side w/ same config robert.mccorkle@gmail.com Linux Networking 2 09-20-2006 02:37 PM
How to access config tool Cisco 836 Router from win xp/ explorer? J. Aerssens Network Routers 0 01-23-2006 10:07 PM



1 2 3 4 5 6 7 8 9 10 11