On Sun, 24 Jan 2010 09:51:04 +0000, Geoff Mills <(E-Mail Removed)> wrote:
> This morning I positioned the switch so that I could observe it from
> power-on whilst sitting in bed with a cuppa. After 45 minutes it
> stopped flickering and came on solid. Meanwhile as a result of my
> relaxed position watching the twinkling lights I had positively
> transcended. So, I'm going to settle for it, keep things the way they
> are and make the switch observation part of my daily regime.
> Thanks for the advice.
I suggest you go back into the WAN side of the router and see if any other
configuration will allow it to come to terms with the fact than nothing is
working at the front end and enable the switch/hub on the LAN side sooner.
You didn't say what kind of router - is it DSL or Ethernet? If DSL try a
bridged mode configuration. With DSL or ethernet, see if you can configure
for fixed IP to prevent its DHCP client struggle with no available server.
Tony
|
Similar Threads
Linear Mode
