Re: anyone using multiport USB -> serial devices

On Wed, 24 Feb 2010 15:20:12 -0800 (PST), dave64 <(E-Mail Removed)> wrote:

> Hi. I'm looking for anyone who may have had some success with multi-
> port usb -> serial devices.

I've used 4-port devices from Digi and Sealevel. But not to answer
modems.


> I have used single port devices and they work great for dialing out
> but at least the one I used wouldn't let me run setserial so as to
> configure to answer a modem.

Using setserial is a very strange way to configure a port to answer a
modem. Usually one would use something like mgetty. AFAIK, setserial
is only used to set things like the IRQ for a normal UART and is not
very useful with any USB serial device.


--
-| Bob Hauck (Brother Nail Gun of The Short Path)
-| http://www.haucks.org/