Re: How TO: Add additional Hub or Switch to MN-700 Router?

I'd grab a Microsoft 5 Port Switch or similar brand. With Microsoft's
switch, all you need to do is connect the switch (using an ethernet cable
plugged into a free port on the switch) to a free port on your MN-700 and
you'll be all set to go. If you use a different brand of switch, be sure to
look for an uplink port. If there is one, you will need to connect the
cable that goes to the MN-700 through that port -- if not, any port will do
on your switch (it most likely has an autosense feature like Microsoft's
switch does to determine an uplink). I have an MN-700 connected to a
Microsoft 5 Port Switch, which is also connected to an MN-500 (for B only
traffic) and it works without a hitch.
--
rm

Please remove "nospam" from email address to send email.


<(E-Mail Removed)> wrote in message
news:04c401c3d8ad$ec2586d0$(E-Mail Removed)...
> I would like to attach another 8 port switch or hub to
> this router. How do I do that?
>
> Mike Lamanne