RAS Service will not start. Help!

I originally posted this to microsoft.public.windows.server.sbs but I am
really stuck on this.
Please excuse the cross-posting.

SBS2003.

Today as part of a network reorg. I reconfigured Routing and Remote Access
to enable VPN's.
I used the Server Management "Configure Remote Access" wizard and was logged
in as a user with admin rights.
RAS now fails to start with an error 691.
I am also getting a Security event - FailureAud EventId: 534

I have disabled and reconfigured logged in as Administrator to no avail.

Any thoughts would be most appreciated.

TIA
Steve

do you also receive event id 7024 in the event viewer?

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
Networking Solutions, http://www.chicagotech.net/networksolutions.htm
VPN Solutions, http://www.chicagotech.net/vpnsolutions.htm
VPN Process and Error Analysis, http://www.chicagotech.net/VPN%20process.htm
VPN Troubleshooting, http://www.chicagotech.net/vpn.htm
This posting is provided "AS IS" with no warranties.
"runningdog" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>I originally posted this to microsoft.public.windows.server.sbs but I am
> really stuck on this.
> Please excuse the cross-posting.
>
> SBS2003.
>
> Today as part of a network reorg. I reconfigured Routing and Remote Access
> to enable VPN's.
> I used the Server Management "Configure Remote Access" wizard and was
> logged
> in as a user with admin rights.
> RAS now fails to start with an error 691.
> I am also getting a Security event - FailureAud EventId: 534
>
> I have disabled and reconfigured logged in as Administrator to no avail.
>
> Any thoughts would be most appreciated.
>
> TIA
> Steve
>
>
>

Yes
"The Routing and Remote Access service terminated with service-specific error 691 (0x2B3)."

"Robert L [MS-MVP]" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)...
> do you also receive event id 7024 in the event viewer?
>
> --
> For more and other information, go to http://www.ChicagoTech.net
>
> Don't send e-mail or reply to me except you need consulting services.
> Posting on MS newsgroup will benefit all readers and you may get more help.
>
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
> http://www.ChicagoTech.net
> Networking Solutions, http://www.chicagotech.net/networksolutions.htm
> VPN Solutions, http://www.chicagotech.net/vpnsolutions.htm
> VPN Process and Error Analysis, http://www.chicagotech.net/VPN%20process.htm
> VPN Troubleshooting, http://www.chicagotech.net/vpn.htm
> This posting is provided "AS IS" with no warranties.
> "runningdog" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> >I originally posted this to microsoft.public.windows.server.sbs but I am
> > really stuck on this.
> > Please excuse the cross-posting.
> >
> > SBS2003.
> >
> > Today as part of a network reorg. I reconfigured Routing and Remote Access
> > to enable VPN's.
> > I used the Server Management "Configure Remote Access" wizard and was
> > logged
> > in as a user with admin rights.
> > RAS now fails to start with an error 691.
> > I am also getting a Security event - FailureAud EventId: 534
> >
> > I have disabled and reconfigured logged in as Administrator to no avail.
> >
> > Any thoughts would be most appreciated.
> >
> > TIA
> > Steve
> >
> >
> >
>
>