Q: Non-Cisco wireless client adapters on Cisco AP350 WLAN ?

Hi group,

Doesnt anybody use Cisco LEAP ??

Is it possible to run non-cisco client adapters with LEAP on a Cisco AP350
wlan.11b, running 12.02.T firmware and ACS 3.02 ?

What software do I need to get win2k and XP to run LEAP ?
Microsoft offcourse says they dont support LEAP, only PEAP.

I what to use all sorts of different wlan cards, with exsisting wlan.
most cards are Dell Truemobile. (btw is this Lucent chips ??)

I have tried the Funk Odyssey v2.0 but have big trouble.

I have so far tested IntelPRO/Wireless 2011B, Dell TrueMobile 1150 and Cisco
DS4800 PCCARDS.

Regards
Martin

Martin Bilgrav wrote:
>
> Hi group,
>
> Doesnt anybody use Cisco LEAP ??
>
> Is it possible to run non-cisco client adapters with LEAP on a Cisco AP350
> wlan.11b, running 12.02.T firmware and ACS 3.02 ?
>
> What software do I need to get win2k and XP to run LEAP ?
> Microsoft offcourse says they dont support LEAP, only PEAP.
>
> I what to use all sorts of different wlan cards, with exsisting wlan.
> most cards are Dell Truemobile. (btw is this Lucent chips ??)
>
> I have tried the Funk Odyssey v2.0 but have big trouble.
>
> I have so far tested IntelPRO/Wireless 2011B, Dell TrueMobile 1150 and Cisco
> DS4800 PCCARDS.
>

I recently upgraded the firmware and driver in my Dlink DWL650+ and this
now has two options in the advanced settings of Leap enabled and Leap
user name. Maybe this card would work.

Cheers.


--
Martin Saltiel

These computers will never catch on...

"Martin Saltiel" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed).. .

> I recently upgraded the firmware and driver in my Dlink DWL650+ and this
> now has two options in the advanced settings of Leap enabled and Leap
> user name. Maybe this card would work.
>

Thank you for replying.
Is this a PCCARD or PCI Card ?

Regards
Martin

Martin Bilgrav wrote:
>
> "Martin Saltiel" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed).. .
>
> > I recently upgraded the firmware and driver in my Dlink DWL650+ and this
> > now has two options in the advanced settings of Leap enabled and Leap
> > user name. Maybe this card would work.
> >
>
> Thank you for replying.
> Is this a PCCARD or PCI Card ?
>
PCMCIA (Cardbus) card, The PCI one is a DWL520+ I haven't installed that
yet so I don't know if it has the same option.

--
Martin Saltiel

These computers will never catch on...