PXE-E55: proxyDHCP service did not reply to request on port 4011

Hi there I'm hoping someone out there can help me....

I have built a linux (fedora core 1) PXE server on my network, but have
a seperate windows DHCP server that I can change but not replace. The
PXE server has two NIC cards: eth0 is on the same subnet as the DHCP
addresss pool, and eth1 has a static IP for administrative purposes.

I installed all the related packages on the PXE box, and can see that
tftpd and pxe are running OK. The netstat -a shows the two services:

udp 0 0 *xe *:*
udp 0 0 *:tftp *:*

and here is a nestat on PXE

[root@dodo tftpboot]# netstat -an | grep 4011
udp 0 0 0.0.0.0:4011 0.0.0.0:*
udp 0 0 10.1.9.24:4011 0.0.0.0:*

I then boot my PXE client and it receives an IP address but gives the
following error message:

PXE-E55: proxyDHCP service did not reply to request on port 4011

I have tried adding/subtracting the following options from my DHCP
scope:

60 ClassID PXEClient
66 BootServer <address of my boot server>
67 BootFilename pxelinux

When I remove these options I get:

PXE-E53: No boot filename received.

I think its a routing issue, because I am having trouble pinging from
the PXE server to other address on the same subnet. I get:

>From 10.1.9.24 icmp_seq=1 Destination Host Unreachable

Here is my routing table

default 10.1.8.209 255.255.252.0 UG 0 0 0
eth1
10.1.8.0 * 255.255.252.0 U 0 0 0
eth1
10.1.8.0 * 255.255.252.0 U 0 0 0
eth1
169.254.0.0 * 255.255.0.0 U 0 0 0
eth1
127.0.0.0 * 255.0.0.0 U 0 0 0
lo


Thanks in advance for any light you can shine on this issue,

Kate

(E-Mail Removed) wrote:
> Hi there I'm hoping someone out there can help me....
>
> I have built a linux (fedora core 1) PXE server on my network, but have
> a seperate windows DHCP server that I can change but not replace. The
> PXE server has two NIC cards: eth0 is on the same subnet as the DHCP
> addresss pool, and eth1 has a static IP for administrative purposes.
>
> I installed all the related packages on the PXE box, and can see that
> tftpd and pxe are running OK. The netstat -a shows the two services:
>
> udp 0 0 *xe *:*
> udp 0 0 *:tftp *:*
>
> and here is a nestat on PXE
>
> [root@dodo tftpboot]# netstat -an | grep 4011
> udp 0 0 0.0.0.0:4011 0.0.0.0:*
> udp 0 0 10.1.9.24:4011 0.0.0.0:*
>
> I then boot my PXE client and it receives an IP address but gives the
> following error message:
>
> PXE-E55: proxyDHCP service did not reply to request on port 4011
>
> I have tried adding/subtracting the following options from my DHCP
> scope:
>
> 60 ClassID PXEClient
> 66 BootServer <address of my boot server>
> 67 BootFilename pxelinux
>
> When I remove these options I get:
>
> PXE-E53: No boot filename received.
>
> I think its a routing issue, because I am having trouble pinging from
> the PXE server to other address on the same subnet. I get:
>
>>From 10.1.9.24 icmp_seq=1 Destination Host Unreachable
>
> Here is my routing table
>
> default 10.1.8.209 255.255.252.0 UG 0 0 0
> eth1
> 10.1.8.0 * 255.255.252.0 U 0 0 0
> eth1
> 10.1.8.0 * 255.255.252.0 U 0 0 0
> eth1
> 169.254.0.0 * 255.255.0.0 U 0 0 0
> eth1
> 127.0.0.0 * 255.0.0.0 U 0 0 0
> lo
>
>
> Thanks in advance for any light you can shine on this issue,
>
> Kate
>

Hello,

is ip_forwarding on?

BR
Hans-Juergen Lange