"Adam" <(E-Mail Removed)> wrote in message
news

an.2004.01.05.21.26.03.987449@saynotospamhot mail.com...
> I have just installed a Belkin wireless and 4 port router. I am using dhcp
> to allocate IP addresses. All is fine for outgoing traffic, however I can
> no longer get access to my Web Server from outside the network (or ftp or
> ssh for that matter). I have configured the firewall to route all action
> on port 80 to the box which has the server. When I go to my domain name
> from inside the network, instead of seeing the web server I see the router
> control panel. From outside I get nothing at all. I have tried turning off
> the router firewall alltogether but this doesn't help either. I am running
> RedHat Severn AS but I have tried from a Windows box as well with the same
> problems.
>
> Any ideas would be appreciated.
You should be able to move the router control panel to another port,eg port
81,
and access it with
http://192.168.1.254:81/ change the ip address and port
to suit your config.
Then you should be able to configure the router's virtual servers , or port
forwarding.
You Forward the port 80s ,20,21,22 to the internal address of the web
server.
And then, if the web server isnt firewalling off other traffic, it should
work.
>
> Cheers,
> Adam