problem with smartbridge login

Hi.

I have two smartbridges, and can't login to one, after firmware upgrade.
There is message:
Incorrect password: You are trying to login as administrator with user's
password !
I use 'public' password.
Why can't I login to only one of smarbridge ?
They have now the same firmware.
Is this firmware error ?

When i installed old firmware again this error doesn't disappeared
and i can't login at all.

Anyone know what is that ?
Thanks for help
Pawelr

Pawe³r wrote:

> Hi.
>
> I have two smartbridges, and can't login to one, after firmware upgrade.
> There is message:
> Incorrect password: You are trying to login as administrator with user's
> password !
> I use 'public' password.
> Why can't I login to only one of smarbridge ?
> They have now the same firmware.
> Is this firmware error ?
>
> When i installed old firmware again this error doesn't disappeared
> and i can't login at all.
>
> Anyone know what is that ?
> Thanks for help
> Pawelr

Do a hard reset on the bridge using a paperclip on the power injector
(leave it inserted for about 15 seconds). Make sure your computer that
is running simpleMonitor is using an IP of 192.168.0.xxx with a subnet
of 255.255.255.0. The smartBridge defaults to an IP of 192.168.0.22 and
the password will indeed be "public". Doing a search for the bridge in
simpleMonitor frequently won't show it, just manually enter the IP and
the password and click the "Login" button. If no luck, post back.

> Do a hard reset on the bridge using a paperclip on the power injector
> (leave it inserted for about 15 seconds). Make sure your computer that
> is running simpleMonitor is using an IP of 192.168.0.xxx with a subnet
> of 255.255.255.0. The smartBridge defaults to an IP of 192.168.0.22 and
> the password will indeed be "public". Doing a search for the bridge in
> simpleMonitor frequently won't show it, just manually enter the IP and
> the password and click the "Login" button. If no luck, post back.

Thank you very much.
It's workin now.

Pawelr

Pawelr wrote:

>>Do a hard reset on the bridge using a paperclip on the power injector
>>(leave it inserted for about 15 seconds). Make sure your computer that
>>is running simpleMonitor is using an IP of 192.168.0.xxx with a subnet
>>of 255.255.255.0. The smartBridge defaults to an IP of 192.168.0.22 and
>>the password will indeed be "public". Doing a search for the bridge in
>>simpleMonitor frequently won't show it, just manually enter the IP and
>>the password and click the "Login" button. If no luck, post back.
>
>
> Thank you very much.
> It's workin now.
>
> Pawelr

Happy to have helped.