Problem with Orinoco AP2000 with the upgrade kit..........................help.. Thanx.

I am having problems with my Orinoco AP2000 with the current firmware and an
upgrade kit in Slot A. A 802.11b card is in slot B. I've configured the
interfaces with different SSIDs. During trouble shooting, other than the SSIDs,
I don't have them mac filtered nor WEP enabled. The laptop recognizes both
cards and can connect to the B card but Slot A with the upgrade card will not
connect. The laptop with XP sees the radio in Slot A and the SSID but will not
connect.

Under Interface status everything looks normal to me at least:

Type wireless-csmaca
Description 0.0
MIB Specific Definition ar0
MAC Address 00:20:A6:52:1E:00
Last Change 195411900
Operational Status Up
Admin Status Up
Speed 54000000
Maximum Packet Size 1500
In Octets (bytes) 0
In Unicast Packets 0
In Non-unicast Packets 0
In Discards 0
In Errors 0
Unknown Protocols 0
Out Octets (bytes) 200447934
Out Unicast Packets 0
Out Non-unicast Packets 2243315
Out Discards 0
Out Errors 0
Output Queue Length 10
Transmitted Fragment Count 0
Multicast Transmitted Frame Count 204443
Failed Count 0
Retry Count 0
Multiple Retry Count 0
Duplicate Frame Count 0
Successful RTS Count 0
Failed RTS Count 0
Failed ACK Count 0
Received Fragment Count 0
Multicast Received Frame Count 0
FCS Error 3282359
Transmitted Frame Count 550130
WEP Undecryptable Count 0

Any help would be appreciated. TIA.
--
NewsGuy.Com 30Gb $9.95 Carry Forward and On Demand Bandwidth