Problem with Linksys WPC-11 and W98

I recently bought a used WPC-11 (no installation disc)
and tried to install it on a laptop running W98. I went to
the LINKSYS site and downloaded ver4 of the driver
and tried to install it on my system. I am able to run the
installation from the AutoRun folder and this appears to
go corrctly but when I look at the device manager I see
a report that NDISVXD, NTKERN.VXD device loaders
could not load the device driver (code 2). I am not certain
what I should do next. Can anyone suggest a course of
action? MK

There are several different models of the WPC-11, you will need to check the
card to make sure you're downloading the right ones. The Ver4 drivers
aren't "Version 4 of the WPC-11" drivers, they're "Drivers for the WPC-11
Version 4 card".

--
Richard G. Harper ((E-Mail Removed)) MVP Win9x
* Please post all messages and replies in the newsgroup so that
* all may benefit. Private mail is usually not replied to.
* Help US Help YOU ... http://www.dts-l.org/goodpost.htm

"Marvin Kroll" <(E-Mail Removed)> wrote in message
news:qB6Ib.559736$(E-Mail Removed)...
>I recently bought a used WPC-11 (no installation disc)
> and tried to install it on a laptop running W98. I went to
> the LINKSYS site and downloaded ver4 of the driver
> and tried to install it on my system. I am able to run the
> installation from the AutoRun folder and this appears to
> go corrctly but when I look at the device manager I see
> a report that NDISVXD, NTKERN.VXD device loaders
> could not load the device driver (code 2). I am not certain
> what I should do next. Can anyone suggest a course of
> action? MK
>
>