problem with dlink dsl g604T

Hi -

I have a problem with the port forwarding page in the setup for the dlink
dsl g604T adsl modem router.

I can use other pages on the 10.1.1.1 site - for the router - but cannot use
the advanced - port forwarding page.

I doubt if i am the only one who has this problem - but I would like to be
able to save or edit ports.

When i try to edit or add or delete a port forwarding entry I get an error
message like:

char :1
error : object expected,
code : 0
URL:
http://10.1.1.1/cgi_bin/webcm?getpag...htm&var:rule=0

but i cannot do anthing about this with ie browser settings. Dlink tell me
it is a microsoft problem - but i am not sure - i think that the firmware
may be bugged. I think that i will need to reset and re-install the
firmware.

Any advice appreciated.

Doug

Hello, gordon!
You wrote on Wed, 20 Jul 2005 06:19:33 +1000:

g> When i try to edit or add or delete a port forwarding entry I get an
g> error message like:

g> char :1
g> error : object expected,
g> code : 0
g> URL:
g>
http://10.1.1.1/cgi_bin/webcm?getpag...htm&var:rule=0
g> Any advice appreciated.

You can try to input the Rulename beginning with a number, like: 1-Shareaza
Choose TCP or UDP
Fill Port Start, Port End and Port Map with the portnumber
Add to right column.
Apply and Save all under Tools > System commands.

Hope it works.

With best regards, EDJO.