Problem Connecting To Network Shares (MN-500)

I've got all my connections on the back of my MN-500 used. I've added a HUB
which is connected to the MN-500 basestation/router via it's UPLINK
connection on the back. As a result I am able to add more computers to get
on the Internet. My problem is.....every computer I attach to the HUB, NOT
the MN-500 router, can only get an IP and browse the Net and cannot view
network shares or the network neighbourhood. If I unplug the connection from
the HUB and connect it directly to the MN-500 router network shares works!
Whats up with that? Anyone have any suggestions? I've tried three different
hubs thinking it was the hub....

HELP...

See if you can access the other computers by typing in the
ip directly. Start->run, and type:

\\192.168.0.2

or whatever the local ip is of the computer you want to
access. Does that work?


>-----Original Message-----
>I've got all my connections on the back of my MN-500 used.
I've added a HUB
>which is connected to the MN-500 basestation/router via
it's UPLINK
>connection on the back. As a result I am able to add more
computers to get
>on the Internet. My problem is.....every computer I attach
to the HUB, NOT
>the MN-500 router, can only get an IP and browse the Net
and cannot view
>network shares or the network neighbourhood. If I unplug
the connection from
>the HUB and connect it directly to the MN-500 router
network shares works!
>Whats up with that? Anyone have any suggestions? I've
tried three different
>hubs thinking it was the hub....
>
>HELP...
>
>
>.
>

nope didnt work...


<(E-Mail Removed)> wrote in message
news:360c01c48f59$b66b4080$(E-Mail Removed)...
> See if you can access the other computers by typing in the
> ip directly. Start->run, and type:
>
> \\192.168.0.2
>
> or whatever the local ip is of the computer you want to
> access. Does that work?
>
>
> >-----Original Message-----
> >I've got all my connections on the back of my MN-500 used.
> I've added a HUB
> >which is connected to the MN-500 basestation/router via
> it's UPLINK
> >connection on the back. As a result I am able to add more
> computers to get
> >on the Internet. My problem is.....every computer I attach
> to the HUB, NOT
> >the MN-500 router, can only get an IP and browse the Net
> and cannot view
> >network shares or the network neighbourhood. If I unplug
> the connection from
> >the HUB and connect it directly to the MN-500 router
> network shares works!
> >Whats up with that? Anyone have any suggestions? I've
> tried three different
> >hubs thinking it was the hub....
> >
> >HELP...
> >
> >
> >.
> >

Try pinging the other computers by IP address.

If that doesn't work then you most likely have a software firewall
installed on some of the computers.

Kevin wrote:

> nope didnt work...
>
>
> <(E-Mail Removed)> wrote in message
> news:360c01c48f59$b66b4080$(E-Mail Removed)...
>
>>See if you can access the other computers by typing in the
>>ip directly. Start->run, and type:
>>
>>\\192.168.0.2
>>
>>or whatever the local ip is of the computer you want to
>>access. Does that work?
>>
>>
>>
>>>-----Original Message-----
>>>I've got all my connections on the back of my MN-500 used.
>>
>>I've added a HUB
>>
>>>which is connected to the MN-500 basestation/router via
>>
>>it's UPLINK
>>
>>>connection on the back. As a result I am able to add more
>>
>>computers to get
>>
>>>on the Internet. My problem is.....every computer I attach
>>
>>to the HUB, NOT
>>
>>>the MN-500 router, can only get an IP and browse the Net
>>
>>and cannot view
>>
>>>network shares or the network neighbourhood. If I unplug
>>
>>the connection from
>>
>>>the HUB and connect it directly to the MN-500 router
>>
>>network shares works!
>>
>>>Whats up with that? Anyone have any suggestions? I've
>>
>>tried three different
>>
>>>hubs thinking it was the hub....
>>>
>>>HELP...
>>>
>>>
>>>.
>>>
>
>
>