PPPD 2.4.1 and 2.4.2 with wvdial 1.53 problem

Hello

I have downloaded pppd 2.4.2 (and 2.4.1 after I failed to connect with
2.4.1) and it compiled (both the kernel and the user parts) OK.

Without any changes to my wvdial 1.53 conf file, I try to use the new pppd.

Result:

Feb 13 15:53:16 gw wvdial[2629]: WvDial: Internet dialer version 1.53
Feb 13 15:53:16 gw wvdial[2629]: Initializing modem.
Feb 13 15:53:16 gw wvdial[2629]: Sending: AT
Feb 13 15:53:16 gw wvdial[2629]: ERROR
Feb 13 15:53:16 gw wvdial[2629]: ERROR
Feb 13 15:53:16 gw wvdial[2629]: OK
Feb 13 15:53:16 gw wvdial[2629]: Sending: ATB0
Feb 13 15:53:16 gw wvdial[2629]: ERROR
Feb 13 15:53:16 gw wvdial[2629]: Bad init string.
Feb 13 15:53:16 gw wvdial[2629]: Initializing modem.
Feb 13 15:53:16 gw wvdial[2629]: Sending: AT
Feb 13 15:53:17 gw wvdial[2629]: ERROR
Feb 13 15:53:17 gw wvdial[2629]: ERROR
Feb 13 15:53:17 gw wvdial[2629]: OK
Feb 13 15:53:17 gw wvdial[2629]: Sending: ATB0
Feb 13 15:53:17 gw wvdial[2629]: ERROR
Feb 13 15:53:17 gw wvdial[2629]: Bad init string.
Feb 13 15:53:17 gw wvdial[2629]: Initializing modem.
Feb 13 15:53:17 gw wvdial[2629]: Sending: AT
Feb 13 15:53:17 gw wvdial[2629]: ERROR
Feb 13 15:53:17 gw wvdial[2629]: OK
Feb 13 15:53:17 gw wvdial[2629]: Sending: ATB0
Feb 13 15:53:17 gw wvdial[2629]: ERROR
Feb 13 15:53:17 gw wvdial[2629]: Bad init string.
Feb 13 15:53:17 gw pppd[2618]: Connect script failed
Feb 13 15:53:44 gw pppd[2631]: tdb_store failed: IO Error
Feb 13 15:53:44 gw pppd[2632]: tdb_store key failed: IO Error
Feb 13 15:53:44 gw pppd[2632]: tdb_store failed: IO Error
Feb 13 15:53:44 gw pppd[2632]: pppd 2.4.2 started by root, uid 0
Feb 13 15:53:44 gw pppd[2632]: tdb_store failed: IO Error
Feb 13 15:53:44 gw pppd[2632]: tdb_store key failed: IO Error
Feb 13 15:53:44 gw pppd[2632]: tdb_store failed: IO Error
Feb 13 15:53:44 gw pppd[2632]: tdb_store key failed: IO Error
Feb 13 15:53:44 gw pppd[2632]: tdb_store failed: IO Error
Feb 13 15:53:44 gw pppd[2632]: Using interface ppp1
Feb 13 15:53:44 gw pppd[2632]: tdb_store key failed: IO Error
Feb 13 15:53:44 gw pppd[2632]: tdb_store failed: IO Error
Feb 13 15:53:44 gw pppd[2632]: not replacing existing default route to ppp0
[10.112.112.112]
__________________________________________________ _______
OR

Feb 13 15:54:49 gw wvdial[2675]: WvDial: Internet dialer version 1.53
Feb 13 15:54:49 gw wvdial[2675]: Initializing modem.
Feb 13 15:54:49 gw wvdial[2675]: Sending: AT
Feb 13 15:54:49 gw wvdial[2675]: ERROR
Feb 13 15:54:49 gw last message repeated 2 times
Feb 13 15:54:49 gw wvdial[2675]: OK
Feb 13 15:54:49 gw wvdial[2675]: Modem initialized.
Feb 13 15:54:49 gw wvdial[2675]: Sending: ATD8962518180
Feb 13 15:54:49 gw wvdial[2675]: Waiting for carrier.
Feb 13 15:54:49 gw wvdial[2675]: ERROR
Feb 13 15:54:49 gw wvdial[2675]: Voice line detected. Trying again.
Feb 13 15:54:49 gw wvdial[2675]: Sending: ATD8962518180
Feb 13 15:54:49 gw wvdial[2675]: Waiting for carrier.
Feb 13 15:54:50 gw wvdial[2675]: ERROR
Feb 13 15:54:50 gw wvdial[2675]: Voice line detected. Trying again.
Feb 13 15:54:50 gw wvdial[2675]: Sending: ATD8962518180
Feb 13 15:54:50 gw wvdial[2675]: Waiting for carrier.
Feb 13 15:54:50 gw wvdial[2675]: NO CARRIER
Feb 13 15:54:50 gw wvdial[2675]: No Carrier! Trying again.
Feb 13 15:54:51 gw wvdial[2675]: Sending: ATD8962518180
Feb 13 15:54:51 gw wvdial[2675]: Waiting for carrier.
Feb 13 15:54:51 gw wvdial[2675]: NO CARRIER
Feb 13 15:54:51 gw wvdial[2675]: No Carrier! Trying again.
Feb 13 15:54:51 gw wvdial[2675]: Sending: ATD8962518180
Feb 13 15:54:51 gw wvdial[2675]: Waiting for carrier.
Feb 13 15:54:51 gw wvdial[2675]: NO CARRIER
Feb 13 15:54:51 gw wvdial[2675]: No Carrier! Trying again.
Feb 13 15:54:52 gw wvdial[2675]: Sending: ATD8962518180
Feb 13 15:54:52 gw wvdial[2675]: Waiting for carrier.
Feb 13 15:54:52 gw wvdial[2675]: NO CARRIER
Feb 13 15:54:52 gw wvdial[2675]: No Carrier! Trying again.
Feb 13 15:54:52 gw wvdial[2675]: Sending: ATD8962518180
Feb 13 15:54:52 gw wvdial[2675]: Waiting for carrier.
Feb 13 15:54:52 gw wvdial[2675]: NO CARRIER
Feb 13 15:54:52 gw wvdial[2675]: No Carrier! Trying again.
Feb 13 15:54:53 gw wvdial[2675]: Sending: ATD8962518180
Feb 13 15:54:53 gw wvdial[2675]: Waiting for carrier.
Feb 13 15:54:53 gw wvdial[2675]: NO CARRIER
Feb 13 15:54:53 gw wvdial[2675]: No Carrier! Trying again.
Feb 13 15:54:54 gw wvdial[2675]: Sending: ATD8962518180
Feb 13 15:54:54 gw wvdial[2675]: Waiting for carrier.
Feb 13 15:54:54 gw wvdial[2675]: NO CARRIER
Feb 13 15:54:54 gw wvdial[2675]: No Carrier! Trying again.
Feb 13 15:54:54 gw wvdial[2675]: Sending: ATD8962518180
Feb 13 15:54:54 gw wvdial[2675]: Waiting for carrier.
Feb 13 15:54:54 gw wvdial[2675]: NO CARRIER
Feb 13 15:54:54 gw wvdial[2675]: No Carrier! Trying again.
Feb 13 15:54:54 gw wvdial[2675]: Maximum Attempts Exceeded..Aborting!!
Feb 13 15:54:54 gw wvdial[2675]: Disconnecting at Fri Feb 13 15:54:54 2004
Feb 13 15:54:54 gw pppd[2665]: Serial connection established.
Feb 13 15:54:54 gw pppd[2665]: tdb_store failed: IO Error
Feb 13 15:54:54 gw pppd[2665]: using channel 6
Feb 13 15:54:54 gw pppd[2665]: Connect: ppp0 <--> /dev/input/ttyACM0
Feb 13 15:54:54 gw pppd[2665]: tdb_store failed: IO Error
Feb 13 15:54:54 gw last message repeated 2 times
Feb 13 15:54:55 gw pppd[2665]: sent [LCP ConfReq id=0x1 <asyncmap 0x0>
<magic 0x57d1a2e> <pcomp> <accomp>
]
Feb 13 15:55:22 gw last message repeated 9 times
Feb 13 15:55:25 gw pppd[2665]: LCP: timeout sending Config-Requests
Feb 13 15:55:25 gw pppd[2665]: Connection terminated.
Feb 13 15:55:25 gw pppd[2665]: Receive serial link is not 8-bit clean:
Feb 13 15:55:25 gw pppd[2665]: Problem: all had bit 7 set to 0
Feb 13 15:55:38 gw pppd[2665]: Terminating on signal 15.
Feb 13 15:55:38 gw pppd[2665]: Exit.
:
__________________________________________________ _______

I have kept backup of the old binaries staff (also 2.4.1) and if I use the
old pppd I get (at the same period that the new pppd says no carrier:

Feb 15 21:26:01 gw wvdial[11140]: WvDial: Internet dialer version 1.53
Feb 15 21:26:01 gw wvdial[11140]: Initializing modem.
Feb 15 21:26:01 gw wvdial[11140]: Sending: AT
Feb 15 21:26:01 gw wvdial[11140]: OK
Feb 15 21:26:01 gw wvdial[11140]: Sending: ATB0
Feb 15 21:26:01 gw wvdial[11140]: OK
Feb 15 21:26:06 gw wvdial[11140]: Sending: ATDT8962518180
Feb 15 21:26:06 gw wvdial[11140]: Waiting for carrier.
Feb 15 21:26:07 gw wvdial[11140]: CONNECT
Feb 15 21:26:07 gw wvdial[11140]: Carrier detected. Chatmode finished.
Feb 15 21:26:07 gw pppd[11130]: Serial connection established.
Feb 15 21:26:07 gw pppd[11130]: tdb_store failed: IO Error
Feb 15 21:26:07 gw pppd[11130]: using channel 19
Feb 15 21:26:07 gw pppd[11130]: Connect: ppp0 <--> /dev/input/ttyACM0
Feb 15 21:26:07 gw pppd[11130]: tdb_store failed: IO Error
Feb 15 21:26:07 gw last message repeated 2 times
Feb 15 21:26:08 gw pppd[11130]: sent [LCP ConfReq id=0x1 <asyncmap 0x0>
<magic 0x79a8ec84> <pcomp> <accom
p>]
Feb 15 21:26:08 gw pppd[11130]: rcvd [LCP ConfRej id=0x1 <pcomp> <accomp>]
Feb 15 21:26:08 gw pppd[11130]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>
<magic 0x79a8ec84>]
Feb 15 21:26:08 gw pppd[11130]: rcvd [LCP ConfReq id=0x6b <auth pap> <magic
0x101b0f62> <asyncmap 0x0>]
Feb 15 21:26:08 gw pppd[11130]: sent [LCP ConfAck id=0x6b <auth pap> <magic
0x101b0f62> <asyncmap 0x0>]
Feb 15 21:26:08 gw pppd[11130]: rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>
<magic 0x79a8ec84>]
Feb 15 21:26:08 gw pppd[11130]: sent [PAP AuthReq id=0x1 user="****"
password=<hidden>]
Feb 15 21:26:08 gw pppd[11130]: rcvd [PAP AuthAck id=0x1 ""]
Feb 15 21:26:08 gw pppd[11130]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>
<compress VJ 0f 01> <ms-dns1 0.0
..0.0> <ms-dns3 0.0.0.0>]
Feb 15 21:26:08 gw pppd[11130]: sent [CCP ConfReq id=0x1 <deflate 15>
<deflate(old#) 15> <bsd v1 15>]
Feb 15 21:26:08 gw pppd[11130]: rcvd [IPCP ConfReq id=0x1 <compress VJ 0f
00> <addr 195.251.183.252>]
Feb 15 21:26:08 gw pppd[11130]: sent [IPCP ConfAck id=0x1 <compress VJ 0f
00> <addr 195.251.183.252>]
Feb 15 21:26:08 gw pppd[11130]: rcvd [IPCP ConfNak id=0x1 <addr
195.251.176.180> <ms-dns1 195.251.177.9>
<ms-dns3 195.251.128.5>]
Feb 15 21:26:08 gw pppd[11130]: sent [IPCP ConfReq id=0x2 <addr
195.251.176.180> <compress VJ 0f 01> <ms-
dns1 195.251.177.9> <ms-dns3 195.251.128.5>]
Feb 15 21:26:08 gw pppd[11130]: rcvd [LCP ProtRej id=0x1 80 fd 01 01 00 0f
1a 04 78 00 18 04 78 00 15 03
2f]
Feb 15 21:26:08 gw pppd[11130]: rcvd [IPCP ConfAck id=0x2 <addr
195.251.176.180> <compress VJ 0f 01> <ms-
dns1 195.251.177.9> <ms-dns3 195.251.128.5>]
Feb 15 21:26:08 gw pppd[11130]: tdb_store failed: IO Error
Feb 15 21:26:08 gw pppd[11130]: tdb_store key failed: IO Error
Feb 15 21:26:08 gw pppd[11130]: tdb_store failed: IO Error
Feb 15 21:26:08 gw last message repeated 3 times
Feb 15 21:26:08 gw pppd[11130]: Local IP address changed to 195.251.176.180
Feb 15 21:26:08 gw pppd[11130]: tdb_store failed: IO Error
Feb 15 21:26:08 gw pppd[11130]: Remote IP address changed to 195.251.183.252
Feb 15 21:26:08 gw pppd[11130]: tdb_store failed: IO Error
Feb 15 21:26:08 gw pppd[11130]: sent [IP data] 45 00 00 54 00 00 40 00 ...
Feb 15 21:26:08 gw pppd[11130]: Script /etc/ppp/ip-up started (pid 11141)
Feb 15 21:26:11 gw pppd[11130]: Script /etc/ppp/ip-up finished (pid 11141),
status = 0x0

__________________________________________________ _____

Any ideas of what is wrong???

I thought to blame wvdial 1.53 so I downloaded 1.54 but I can not get in
anyway wvstreams to compile ( a prerequisit)

I think I have done something wrong with compilation of pppd 2.4.2 & 2.4.1
and it must be the same mistake in both cases... otherwise why the old
binaries run and the new same version self compiled binaries are not?

Thank you for your time.


T. Kontogiannis
U. of the Aegean - SAMOS NOC
(E-Mail Removed)
www.aegean.gr

Theophanis Kontogiannis <(E-Mail Removed)> wrote:

> I have downloaded pppd 2.4.2 (and 2.4.1 after I failed to connect with
> 2.4.1) and it compiled (both the kernel and the user parts) OK.
^ Should this be a "2?"

What do you mean by "kernel and the user parts?" Neither standard
version of pppd contains any kernel code in it's source, except for
old kernels (pre-2.4.0 kernels). It's been my experience that no 2.4.x
pppd except 2.4.0 will work with any 2.2.x or 2.0.x kernel. I don't
know why there is still kernel code in the pppd 2.4.1 and 2.4.2 modules
directories since there is no provision for installing it.

Of course some older kernels are still being updated in some areas,
and the 2.2.18 kernel was the last of the 2.2.x series I used.

> Without any changes to my wvdial 1.53 conf file, I try to use the new pppd.

> Result:

> Feb 13 15:53:16 gw wvdial[2629]: WvDial: Internet dialer version 1.53
> Feb 13 15:53:16 gw wvdial[2629]: Initializing modem.
> Feb 13 15:53:16 gw wvdial[2629]: Sending: AT
> Feb 13 15:53:16 gw wvdial[2629]: ERROR
> Feb 13 15:53:16 gw wvdial[2629]: ERROR
> Feb 13 15:53:16 gw wvdial[2629]: OK
> Feb 13 15:53:16 gw wvdial[2629]: Sending: ATB0
> Feb 13 15:53:16 gw wvdial[2629]: ERROR
> Feb 13 15:53:16 gw wvdial[2629]: Bad init string.

....

> I have kept backup of the old binaries staff (also 2.4.1) and if I use the
> old pppd I get (at the same period that the new pppd says no carrier:

> Feb 15 21:26:01 gw wvdial[11140]: WvDial: Internet dialer version 1.53
> Feb 15 21:26:01 gw wvdial[11140]: Initializing modem.
> Feb 15 21:26:01 gw wvdial[11140]: Sending: AT
> Feb 15 21:26:01 gw wvdial[11140]: OK
> Feb 15 21:26:01 gw wvdial[11140]: Sending: ATB0
> Feb 15 21:26:01 gw wvdial[11140]: OK
> Feb 15 21:26:06 gw wvdial[11140]: Sending: ATDT8962518180
> Feb 15 21:26:06 gw wvdial[11140]: Waiting for carrier.
> Feb 15 21:26:07 gw wvdial[11140]: CONNECT
> Feb 15 21:26:07 gw wvdial[11140]: Carrier detected. Chatmode finished.
> Feb 15 21:26:07 gw pppd[11130]: Serial connection established.
> Feb 15 21:26:07 gw pppd[11130]: tdb_store failed: IO Error
> Feb 15 21:26:07 gw pppd[11130]: using channel 19

> Feb 15 21:26:07 gw pppd[11130]: Connect: ppp0 <--> /dev/input/ttyACM0

This is a USB modem and very likely requires a driver not supplied by
the kernel. A binary for a driver that is not included with the kernel
source may work for one kernel but not another.

It's definitely wvdial or the "modem" that's the problem. If a binary
module for your modem is included in the "the old binaries staff" and
the kernel has changed then the module is a prime suspect.

--
Clifford Kite Email: "echo xvgr_yvahk-(E-Mail Removed)|rot13"
PPP-Q&A links, downloads: http://ckite.no-ip.net/

"Theophanis Kontogiannis" <(E-Mail Removed)> writes:

]Hello

]I have downloaded pppd 2.4.2 (and 2.4.1 after I failed to connect with
]2.4.1) and it compiled (both the kernel and the user parts) OK.

Why? Why did you think the problem was with pppd rather than your setup
and/or wvdial?

See
www.theory.physics.ubc.ca/ppp-linux.html


]Without any changes to my wvdial 1.53 conf file, I try to use the new pppd.

]Result:

]Feb 13 15:53:16 gw wvdial[2629]: WvDial: Internet dialer version 1.53
]Feb 13 15:53:16 gw wvdial[2629]: Initializing modem.
]Feb 13 15:53:16 gw wvdial[2629]: Sending: AT
]Feb 13 15:53:16 gw wvdial[2629]: ERROR

So it cannot find your modem. That is NOT a problem with pppd.

It may be a problem with chat (although I do not think it changed).



]Feb 15 21:26:07 gw pppd[11130]: Connect: ppp0 <--> /dev/input/ttyACM0

What is ttyACM0? What kind of modem you you have?


]Feb 15 21:26:07 gw pppd[11130]: tdb_store failed: IO Error
]Feb 15 21:26:07 gw last message repeated 2 times
]Feb 15 21:26:08 gw pppd[11130]: sent [LCP ConfReq id=0x1 <asyncmap 0x0>
]<magic 0x79a8ec84> <pcomp> <accom
]p>]
]Feb 15 21:26:08 gw pppd[11130]: rcvd [LCP ConfRej id=0x1 <pcomp> <accomp>]
]Feb 15 21:26:08 gw pppd[11130]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>
]<magic 0x79a8ec84>]
]Feb 15 21:26:08 gw pppd[11130]: rcvd [LCP ConfReq id=0x6b <auth pap> <magic
]0x101b0f62> <asyncmap 0x0>]
]Feb 15 21:26:08 gw pppd[11130]: sent [LCP ConfAck id=0x6b <auth pap> <magic
]0x101b0f62> <asyncmap 0x0>]
]Feb 15 21:26:08 gw pppd[11130]: rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>
]<magic 0x79a8ec84>]
]Feb 15 21:26:08 gw pppd[11130]: sent [PAP AuthReq id=0x1 user="****"
]password=<hidden>]
]Feb 15 21:26:08 gw pppd[11130]: rcvd [PAP AuthAck id=0x1 ""]
]Feb 15 21:26:08 gw pppd[11130]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>
]<compress VJ 0f 01> <ms-dns1 0.0
].0.0> <ms-dns3 0.0.0.0>]
]Feb 15 21:26:08 gw pppd[11130]: sent [CCP ConfReq id=0x1 <deflate 15>
]<deflate(old#) 15> <bsd v1 15>]
]Feb 15 21:26:08 gw pppd[11130]: rcvd [IPCP ConfReq id=0x1 <compress VJ 0f
]00> <addr 195.251.183.252>]
]Feb 15 21:26:08 gw pppd[11130]: sent [IPCP ConfAck id=0x1 <compress VJ 0f
]00> <addr 195.251.183.252>]
]Feb 15 21:26:08 gw pppd[11130]: rcvd [IPCP ConfNak id=0x1 <addr
]195.251.176.180> <ms-dns1 195.251.177.9>
]<ms-dns3 195.251.128.5>]
]Feb 15 21:26:08 gw pppd[11130]: sent [IPCP ConfReq id=0x2 <addr
]195.251.176.180> <compress VJ 0f 01> <ms-
]dns1 195.251.177.9> <ms-dns3 195.251.128.5>]
]Feb 15 21:26:08 gw pppd[11130]: rcvd [LCP ProtRej id=0x1 80 fd 01 01 00 0f
]1a 04 78 00 18 04 78 00 15 03
]2f]
]Feb 15 21:26:08 gw pppd[11130]: rcvd [IPCP ConfAck id=0x2 <addr
]195.251.176.180> <compress VJ 0f 01> <ms-
]dns1 195.251.177.9> <ms-dns3 195.251.128.5>]
]Feb 15 21:26:08 gw pppd[11130]: tdb_store failed: IO Error
]Feb 15 21:26:08 gw pppd[11130]: tdb_store key failed: IO Error
]Feb 15 21:26:08 gw pppd[11130]: tdb_store failed: IO Error
]Feb 15 21:26:08 gw last message repeated 3 times
]Feb 15 21:26:08 gw pppd[11130]: Local IP address changed to 195.251.176.180
]Feb 15 21:26:08 gw pppd[11130]: tdb_store failed: IO Error
]Feb 15 21:26:08 gw pppd[11130]: Remote IP address changed to 195.251.183.252
]Feb 15 21:26:08 gw pppd[11130]: tdb_store failed: IO Error
]Feb 15 21:26:08 gw pppd[11130]: sent [IP data] 45 00 00 54 00 00 40 00 ...
]Feb 15 21:26:08 gw pppd[11130]: Script /etc/ppp/ip-up started (pid 11141)
]Feb 15 21:26:11 gw pppd[11130]: Script /etc/ppp/ip-up finished (pid 11141),
]status = 0x0

]__________________________________________________ _____

]Any ideas of what is wrong???

]I thought to blame wvdial 1.53 so I downloaded 1.54 but I can not get in
]anyway wvstreams to compile ( a prerequisit)

]I think I have done something wrong with compilation of pppd 2.4.2 & 2.4.1
]and it must be the same mistake in both cases... otherwise why the old
]binaries run and the new same version self compiled binaries are not?

so use the old ones.

wvdial is an extra layer on top of pppd and chat. don't use it,
especially not for debugging something. It is like trying to figure out
how to repair a pull in silk shirt wearing thick winter gloves.

Hello all again....

The reason I MUST use the new pppd is that I need a new compilation that can
use the active-filter outbound option.

Bill my modem is a USB/ISDN one.

Cliford I will try to look out what is going on with the usb driver...

Thank you all for your time and tips. They are always food for thoughts.
Theophanis




"Bill Unruh" <(E-Mail Removed)> wrote in message
news:c0pou8$1ok$(E-Mail Removed)...
> "Theophanis Kontogiannis" <(E-Mail Removed)> writes:
>
> ]Hello
>
> ]I have downloaded pppd 2.4.2 (and 2.4.1 after I failed to connect with
> ]2.4.1) and it compiled (both the kernel and the user parts) OK.
>
> Why? Why did you think the problem was with pppd rather than your setup
> and/or wvdial?
>
> See
> www.theory.physics.ubc.ca/ppp-linux.html
>
>
> ]Without any changes to my wvdial 1.53 conf file, I try to use the new
pppd.
>
> ]Result:
>
> ]Feb 13 15:53:16 gw wvdial[2629]: WvDial: Internet dialer version 1.53
> ]Feb 13 15:53:16 gw wvdial[2629]: Initializing modem.
> ]Feb 13 15:53:16 gw wvdial[2629]: Sending: AT
> ]Feb 13 15:53:16 gw wvdial[2629]: ERROR
>
> So it cannot find your modem. That is NOT a problem with pppd.
>
> It may be a problem with chat (although I do not think it changed).
>
>
>
> ]Feb 15 21:26:07 gw pppd[11130]: Connect: ppp0 <--> /dev/input/ttyACM0
>
> What is ttyACM0? What kind of modem you you have?
>
>
> ]Feb 15 21:26:07 gw pppd[11130]: tdb_store failed: IO Error
> ]Feb 15 21:26:07 gw last message repeated 2 times
> ]Feb 15 21:26:08 gw pppd[11130]: sent [LCP ConfReq id=0x1 <asyncmap 0x0>
> ]<magic 0x79a8ec84> <pcomp> <accom
> ]p>]
> ]Feb 15 21:26:08 gw pppd[11130]: rcvd [LCP ConfRej id=0x1 <pcomp>
<accomp>]
> ]Feb 15 21:26:08 gw pppd[11130]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>
> ]<magic 0x79a8ec84>]
> ]Feb 15 21:26:08 gw pppd[11130]: rcvd [LCP ConfReq id=0x6b <auth pap>
<magic
> ]0x101b0f62> <asyncmap 0x0>]
> ]Feb 15 21:26:08 gw pppd[11130]: sent [LCP ConfAck id=0x6b <auth pap>
<magic
> ]0x101b0f62> <asyncmap 0x0>]
> ]Feb 15 21:26:08 gw pppd[11130]: rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>
> ]<magic 0x79a8ec84>]
> ]Feb 15 21:26:08 gw pppd[11130]: sent [PAP AuthReq id=0x1 user="****"
> ]password=<hidden>]
> ]Feb 15 21:26:08 gw pppd[11130]: rcvd [PAP AuthAck id=0x1 ""]
> ]Feb 15 21:26:08 gw pppd[11130]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>
> ]<compress VJ 0f 01> <ms-dns1 0.0
> ].0.0> <ms-dns3 0.0.0.0>]
> ]Feb 15 21:26:08 gw pppd[11130]: sent [CCP ConfReq id=0x1 <deflate 15>
> ]<deflate(old#) 15> <bsd v1 15>]
> ]Feb 15 21:26:08 gw pppd[11130]: rcvd [IPCP ConfReq id=0x1 <compress VJ 0f
> ]00> <addr 195.251.183.252>]
> ]Feb 15 21:26:08 gw pppd[11130]: sent [IPCP ConfAck id=0x1 <compress VJ 0f
> ]00> <addr 195.251.183.252>]
> ]Feb 15 21:26:08 gw pppd[11130]: rcvd [IPCP ConfNak id=0x1 <addr
> ]195.251.176.180> <ms-dns1 195.251.177.9>
> ]<ms-dns3 195.251.128.5>]
> ]Feb 15 21:26:08 gw pppd[11130]: sent [IPCP ConfReq id=0x2 <addr
> ]195.251.176.180> <compress VJ 0f 01> <ms-
> ]dns1 195.251.177.9> <ms-dns3 195.251.128.5>]
> ]Feb 15 21:26:08 gw pppd[11130]: rcvd [LCP ProtRej id=0x1 80 fd 01 01 00
0f
> ]1a 04 78 00 18 04 78 00 15 03
> ]2f]
> ]Feb 15 21:26:08 gw pppd[11130]: rcvd [IPCP ConfAck id=0x2 <addr
> ]195.251.176.180> <compress VJ 0f 01> <ms-
> ]dns1 195.251.177.9> <ms-dns3 195.251.128.5>]
> ]Feb 15 21:26:08 gw pppd[11130]: tdb_store failed: IO Error
> ]Feb 15 21:26:08 gw pppd[11130]: tdb_store key failed: IO Error
> ]Feb 15 21:26:08 gw pppd[11130]: tdb_store failed: IO Error
> ]Feb 15 21:26:08 gw last message repeated 3 times
> ]Feb 15 21:26:08 gw pppd[11130]: Local IP address changed to
195.251.176.180
> ]Feb 15 21:26:08 gw pppd[11130]: tdb_store failed: IO Error
> ]Feb 15 21:26:08 gw pppd[11130]: Remote IP address changed to
195.251.183.252
> ]Feb 15 21:26:08 gw pppd[11130]: tdb_store failed: IO Error
> ]Feb 15 21:26:08 gw pppd[11130]: sent [IP data] 45 00 00 54 00 00 40 00
....
> ]Feb 15 21:26:08 gw pppd[11130]: Script /etc/ppp/ip-up started (pid 11141)
> ]Feb 15 21:26:11 gw pppd[11130]: Script /etc/ppp/ip-up finished (pid
11141),
> ]status = 0x0
>
> ]__________________________________________________ _____
>
> ]Any ideas of what is wrong???
>
> ]I thought to blame wvdial 1.53 so I downloaded 1.54 but I can not get in
> ]anyway wvstreams to compile ( a prerequisit)
>
> ]I think I have done something wrong with compilation of pppd 2.4.2 &
2.4.1
> ]and it must be the same mistake in both cases... otherwise why the old
> ]binaries run and the new same version self compiled binaries are not?
>
> so use the old ones.
>
> wvdial is an extra layer on top of pppd and chat. don't use it,
> especially not for debugging something. It is like trying to figure out
> how to repair a pull in silk shirt wearing thick winter gloves.
>
>
>
>