You can do it exactly the way you said; create a shared folder on each
computer where you will put the files to be shared. To share the folder
you create, right click on the folder, choose Sharing and Security and
select "Share this folder on the network". If you want the other
computers to be able to write to the folder, also select "Allow network
users to change my files". If you just want to allow read access, don't
select this.
None of the other files on your computers will be shared. You must
enable sharing manually to share files so you don't have to worry about
the other folders being available to network users.
Hope this helps.
Dan Ricketts wrote:
> Hi All,
>
> I am looking to share files between 2 machines connected via a router, but
> have absolutely no idea how to go about this. The setup is as follows:
>
>
> Linksys router connected to NTL set-top box.
>
> One XP Home machine with a single NIC connected to the Linksys router,
>
> One XP Pro machine with 2 NIC's, One of which is connected to the linksys
> router, the other connected to,
>
> One Windows 98 (OSR1) machine with a single NIC.
>
> One Windows 98 (OSR1) machine with a single NIC, connected to the linksys
> router and acting as a web server.
>
>
> Now both XP boxes and the server can connect to the internet no problems
> (the other 98 machine doesn't need internet access), but I now want to share
> files between both XP boxes. Printer sharing is not required.
>
> I was thinking of perhaps mapping a folder on each computer where files to
> be shared could be placed (I don't really want the other machine to have
> access to all of my files though, only those in the specified folder - is
> this possible?)
>
> Any advice on how to do this would be greatly appreciated. I've google'd for
> information but most of what I can find doesn't make much sense to me (I'm
> still a bit of a 'networking virgin' I'm afraid!)
>
> Many Thanks
>
> Dan Ricketts
>
>
>
|
Similar Threads
Linear Mode
