Not supported.
You can add a persistent port forwarding and use a large
port range, or set the 192.168.2.115 computer on the DMZ --
most often this is sufficient to target incoming to a PC.
It's slightly different from a route add, since it reroutes
traffic to the x.x.x.115 as final destination, with the
exception of traffic in response to another computer in the
LAN (e.g. you use a computer to browse the web -- traffic
in response on that port will go to that computer and not
routed through x.x.x.115)
>-----Original Message-----
>Is it possible to add persistent route record to MN700
>similar to
>route add -p 192.168.0.0 MASK 255.255.255.0 192.168.2.115
>
>Thanks,
>
>Slava.
>
>.
>
|