Port Forwarding Help

Hey,

I run an internet cafe behind a Server 2003
Router/Fileserver using Routing and Remote Access and I
would like to know how to Port Forward a Incoming Packet
from an outside ip to a internal ip on another computer
using a Local Ip (192.168.0.200). I want to be able to
connect to my Router on port 5000 and that will port
forward to 192.168.0.200 to port 4899.

Me (Home) -Port5000-> Router(192.168.0.1) -Port4899->
Local Server(192.168.0.200)

Please give me some insight.

Thanks

Craig

Do this in your router/firewall.

Craig Curran wrote:
> Hey,
>
> I run an internet cafe behind a Server 2003
> Router/Fileserver using Routing and Remote Access and I
> would like to know how to Port Forward a Incoming Packet
> from an outside ip to a internal ip on another computer
> using a Local Ip (192.168.0.200). I want to be able to
> connect to my Router on port 5000 and that will port
> forward to 192.168.0.200 to port 4899.
>
> Me (Home) -Port5000-> Router(192.168.0.1) -Port4899->
> Local Server(192.168.0.200)
>
> Please give me some insight.
>
> Thanks
>
> Craig

How??

I have no firewall installed and unable to find the
options in Routing and remote Access

please help
>-----Original Message-----
>Do this in your router/firewall.
>
>Craig Curran wrote:
>> Hey,
>>
>> I run an internet cafe behind a Server 2003
>> Router/Fileserver using Routing and Remote Access and I
>> would like to know how to Port Forward a Incoming
Packet
>> from an outside ip to a internal ip on another computer
>> using a Local Ip (192.168.0.200). I want to be able to
>> connect to my Router on port 5000 and that will port
>> forward to 192.168.0.200 to port 4899.
>>
>> Me (Home) -Port5000-> Router(192.168.0.1) -Port4899->
>> Local Server(192.168.0.200)
>>
>> Please give me some insight.
>>
>> Thanks
>>
>> Craig
>
>
>.
>

(E-Mail Removed) wrote:
> How??
>
> I have no firewall installed and unable to find the
> options in Routing and remote Access

You're running an Internet Cafe with no firewall? Tsk tsk tsk. You need to
remedy this. You're asking for trouble.
I'm not sure how you'd do this without one, and I repeat again that you need
one, a good one, but perhaps someone else will post.

>
> please help
>> -----Original Message-----
>> Do this in your router/firewall.
>>
>> Craig Curran wrote:
>>> Hey,
>>>
>>> I run an internet cafe behind a Server 2003
>>> Router/Fileserver using Routing and Remote Access and I
>>> would like to know how to Port Forward a Incoming Packet
>>> from an outside ip to a internal ip on another computer
>>> using a Local Ip (192.168.0.200). I want to be able to
>>> connect to my Router on port 5000 and that will port
>>> forward to 192.168.0.200 to port 4899.
>>>
>>> Me (Home) -Port5000-> Router(192.168.0.1) -Port4899->
>>> Local Server(192.168.0.200)
>>>
>>> Please give me some insight.
>>>
>>> Thanks
>>>
>>> Craig
>>
>>
>> .

<(E-Mail Removed)> wrote in message
news:772901c48404$381dcff0$(E-Mail Removed)...
> How??
>
> I have no firewall installed and unable to find the
> options in Routing and remote Access

Of course you have one. You run RFC Private Addresses inside you system.
These aren't compatible with the Internet,...therefore you have *something*
performing either NAT or "proxying" for your system. This is the device that
must be capable of doing the "forwarding",...if it is not capable then you
are simply "screwed".

--

Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com

Port forwarding is part of the RRAS/NAT/Firewall system. From the RRAS
console you should be able to find the place to configure port forwarding.

"Phillip Windell" <@.> wrote in message
news:(E-Mail Removed)...
> <(E-Mail Removed)> wrote in message
> news:772901c48404$381dcff0$(E-Mail Removed)...
> > How??
> >
> > I have no firewall installed and unable to find the
> > options in Routing and remote Access
>
> Of course you have one. You run RFC Private Addresses inside you system.
> These aren't compatible with the Internet,...therefore you have
*something*
> performing either NAT or "proxying" for your system. This is the device
that
> must be capable of doing the "forwarding",...if it is not capable then you
> are simply "screwed".
>
> --
>
> Phillip Windell [MCP, MVP, CCNA]
> www.wandtv.com
>
>