Chris wrote:
> In article <drra9g$qd2$(E-Mail Removed)>,
> (E-Mail Removed) says...
>> Chris wrote:
>>> In article <drm3sc$fhd$(E-Mail Removed)>,
>>> (E-Mail Removed) says...
>>>
>>>> I am getting CRC and HEC errors on my F2S adsl connection.
>>>>
>>>> SNR Margin - Local 18.0 Remote 0.0
>>>> Attenuation - Local 49.0 Remote 28.0
>>>> Transmit Power - Local 11.55 Remote 16.28
>>>>
>>>> Any ideas what the problem may be as the internet is poor and
>>>> applications such as IM keep disconnecting.
>>>>
>>>>
>>>>
>>>
>>> Have you thought about investing in an ADSL face plate from
>>> http://www.clarity.it ? That would more than likely improve your
>>> SNR by a noticeable amount.
>>
>> its at 18db!
>
> No, that's what it was at when the OP checked! My SNR varies from
> 8-25
> depending on the time of day! With a faceplate you stand a much
> better
> chance of keeping a consistently decent SNR. So, my original point
> stands - try a faceplate.
Seconded, a faceplate filter solves multiple problems caused by
internal wiring & it does stabilize the SNR to a great extent. Using
one can also cure problems with CLI displays as well.
It's not a cure-all but it does go a long way towards being one. The
problem then presents itself of how to get the actual DSL signal to
where it ia required, which I will leave to your imagination (taking
the fact that somebody will actually read this posting)
Little hint if you're going to have a paid for ADSL Health Check make
sure a faceplate filter is fitted & that they don't just do the
'dirty' quick fix of disconnecting the bell wire. It's not up to
standard & could give you or anybody moving into your house at a later
date, problems as you'll forget you've had it done & they won't know
it's been done, having said that if you're doing it for yourself, that
is another matter entirely.
Similar Threads
Linear Mode
