You just have to think up an SSID and make sure you put the same on both
cards
(it's like a network identifier)
Also, make sure WEP encryption is disabled on both, until you get
connectivity
Also, put in manual IP addresses
192.168.0.1 for the internet pc
192.168.0.2 for the other one
When on 192.168.0.2 you can "ping 192.168.0.1", you know your hardware is
working and within range, etc... now you can play with dhcp, blah balhaba
wep etc.
"Coenraad Loubser" <(E-Mail Removed)> wrote in message
news:cpmg76$gtr$(E-Mail Removed)...
> All client devices I know of allow this, and it is called Ad Hoc mode
>
> "DavideD" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > Hello,
> > I've a customer needs to connect 2 pc via wireless without using an
Access
> > Point (same as ethernet cross cable).
> >
> > Is there any devices able to do this ?
> > The installation will be in Italy: devices must be available at italian
> > market and frequencies must to responds to italian laws.
> >
> > May anyone helps me ?
> >
> > Thanks in advanced
> > best regards
> > Davide
> >
> >
>
>
|