Assuming ZyXel Router as default gateway, you need to make sure the VPN know how to return Since VPN uses different IP. Basically, each traffic needs to know where to return.
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
<(E-Mail Removed)> wrote in message news:(E-Mail Removed) ups.com...
I work for a small retail business and recently installed IBM 4690
Point of Sale system. We also installed Verifone 7000 signature capture
credit card readers. VPN is currently tunneled through NetGear FS318.
We have been noticing some problems with the response not being
received at the registers and the reader. Somewhere data get lost or
packet loss. Here is my setup:
DSL via T1
|
Switch
--------------------------------------------
| |
VPN ZyXel Router
Static IP Static IP
| |
---------------- Switch -----------------
| | | |
IBM IBM SBS 20
4690 AS/400 2003 PCS
|
8 Registers DHCP to IBM 4690
NetGear has its own WAN and LAN addresses and exclusively used by IBM
4690
ZyXel also has its own WAN and LAN addresses and primarily used by all
other PCS.
We have experienced data loss either by NetGear or in the above setup.
Do I need to replace VPN? or any other solution might help. Thanks.
Similar Threads
Linear Mode
