Networking Forums

Networking Forums > Computer Networking > Linux Networking > PC had two NIC cards, installed Linux, connected eth0 to router, crashing in br_handle_frame?. why?

Reply
Thread Tools Display Modes

PC had two NIC cards, installed Linux, connected eth0 to router, crashing in br_handle_frame?. why?

 
 
santa19992000@yahoo.com
Guest
Posts: n/a

 
      09-23-2005, 05:58 PM
PC had two NIC cards, installed Linux, connected eth0 to router,
crashing in br_handle_frame?. why?

 
Reply With Quote
 
 
 
 
Giovanni
Guest
Posts: n/a

 
      09-23-2005, 06:42 PM
On 09/23/05 19:58, (E-Mail Removed) wrote:
> PC had two NIC cards, installed Linux, connected eth0 to router,
> crashing in br_handle_frame?. why?
>


My cristal ball is out of service for the moment :-(

--
A computer is like an air conditioner,
it stops working when you open Windows.
Registered Linux user #337974 <http://counter.li.org/>
 
Reply With Quote
 
General Schvantzkoph
Guest
Posts: n/a

 
      09-23-2005, 07:51 PM
On Fri, 23 Sep 2005 10:58:09 -0700, santa19992000 wrote:

> PC had two NIC cards, installed Linux, connected eth0 to router,
> crashing in br_handle_frame?. why?


Which kernel are you using? which NIC?

 
Reply With Quote
 
Tauno Voipio
Guest
Posts: n/a

 
      09-23-2005, 08:06 PM
(E-Mail Removed) wrote:
> PC had two NIC cards, installed Linux, connected eth0 to router,
> crashing in br_handle_frame?. why?


It looks that this is a bridged setup - right?

What do the following commands report:

uname -a
ifconfig -a
route -n

What kind (type / model) of Ethernet cards?
(Use the dmesg command to list).

--

Tauno Voipio
tauno voipio (at) iki fi


 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
installed winxp on hyper V virtual machine, cannot see network cards Mehbs Windows Networking 2 06-18-2009 01:49 AM
Dual NIC Cards - forcing eth0 to be used as Public Networkq tech_geek Linux Networking 3 12-19-2008 08:35 PM
Network cards: eth0 - eth3 ? sb5309@yahoo.com Linux Networking 10 04-21-2008 03:24 PM
linux crashing - possible e1000 driver? Jason Keltz Linux Networking 1 03-03-2006 04:51 AM
I installed 3 linux machines on the network using Router (Cable modem), how can I setup e-mail accounts? vasanta Linux Networking 3 09-19-2004 07:13 PM



1 2 3 4 5 6 7 8 9 10 11