Open ports for two IPs

My router (Linksys WRT54G) provides different IPs, depending on the
connection with my PC (wired or wireless, eg. 192.168.1.100 or
192.168.1.101). I need to open two ports for a certain application. I made
an entry in the Application&Gambling section of the router's setup (port
range forward).

However, the ports are assigned to one IP only (the first in the list), i.e.
when I have to change the connection to my router, the PC's IP changes too
and the ports are not open anymore. I also tried "Port triggering" in the
same section, but without success.

Is there any way to assign an open port to more than one IP (both protocols,
TCP and UDP).

Thanks for your help.
Joerg

Assign a static IP to this computer.
http://www.portforward.com/networking/staticip.htm
How to forward ports on Linksys WR54G
http://www.portforward.com/linksys/wrv54g.htm

Ashok S.

"Joerg Reutershan" <(E-Mail Removed)> ???????/???????? ? ???????? ?????????:
news:9ZKdnWH8V515pVLcRVn-(E-Mail Removed)...
> My router (Linksys WRT54G) provides different IPs, depending on the
> connection with my PC (wired or wireless, eg. 192.168.1.100 or
> 192.168.1.101). I need to open two ports for a certain application. I made
> an entry in the Application&Gambling section of the router's setup (port
> range forward).
>
> However, the ports are assigned to one IP only (the first in the list),
> i.e. when I have to change the connection to my router, the PC's IP
> changes too and the ports are not open anymore. I also tried "Port
> triggering" in the same section, but without success.
>
> Is there any way to assign an open port to more than one IP (both
> protocols, TCP and UDP).
>
> Thanks for your help.
> Joerg
>

Im not sure on the Linksys, but on my D-Link I can open ports not only for 1
IP but a range of IPs. Open the port using the range of IPs you have
configured for you connections.

Robert...

"Joerg Reutershan" <(E-Mail Removed)> wrote in message
news:9ZKdnWH8V515pVLcRVn-(E-Mail Removed)...
> My router (Linksys WRT54G) provides different IPs, depending on the
> connection with my PC (wired or wireless, eg. 192.168.1.100 or
> 192.168.1.101). I need to open two ports for a certain application. I made
> an entry in the Application&Gambling section of the router's setup (port
> range forward).
>
> However, the ports are assigned to one IP only (the first in the list),
> i.e. when I have to change the connection to my router, the PC's IP
> changes too and the ports are not open anymore. I also tried "Port
> triggering" in the same section, but without success.
>
> Is there any way to assign an open port to more than one IP (both
> protocols, TCP and UDP).
>
> Thanks for your help.
> Joerg
>