ntptimeset

I'm trying to figure out if ntpd is working right or not. It keeps quitting
periodically, so I just upgraded to 4.1.2 to make sure I was current. Running
ntptimeset gives me errors, however:

22 Sep 12:31:26 ntptimeset[2691]: getnetnum: "ntp3.cs.wisc.edu" invalid host
number, line ignored
22 Sep 12:31:26 ntptimeset[2691]: getnetnum: "ntp1.cs.wisc.edu" invalid host
number, line ignored
22 Sep 12:31:26 ntptimeset[2691]: getnetnum: "ntp3.sf-bay.org" invalid host
number, line ignored
22 Sep 12:31:26 ntptimeset[2691]: getnetnum: "time.apple.com" invalid host
number, line ignored22 Sep 12:31:26 ntptimeset[2691]: Found 0 servers, require
3 servers

Those are all valid hosts. If I run ntpq -p, I get:

remote refid st t when poll reach delay offset jitter
================================================== ============================
+dr-zaius.cs.wis ben.cs.wisc.edu 2 u 53 256 377 54.214 -1.937 0.764
*caesar.cs.wisc. ben.cs.wisc.edu 2 u 173 256 377 53.887 -2.172 0.459
-zoroaster.sf-ba navobs1.wustl.e 2 u 102 256 377 75.648 -36.714 244.671
+ftp08.apple.com 17.254.0.49 2 u 101 256 377 138.628 20.703 25.905


My /etc/ntp.conf is:

server ntp3.cs.wisc.edu
server ntp1.cs.wisc.edu
server ntp3.sf-bay.org
server time.apple.com
#server 130.126.24.44
#server 127.127.1.0 # local clock
#fudge 127.127.1.0 stratum 10
driftfile /etc/ntp/drift
authenticate no




--
Harmon Seaver