On Fri, 26 May 2006 13:48:32 +0100, ABC wrote:
> <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed) oups.com...
>> Hi
>>
>> Does anyone know how to make use of 5 Wan side Ip addresses
>>
>> Is a special router required?
>>
>> thx bhayani
>>
> Usually, you set your router to be a non-NAT'd router, then assign the
> static IP addresses manually ti each device that you have. The problem is
> that each device is effectivley at the mercy of the internet.
and you can only have 5 devices on the lan.. unless you use another NAT
router...then it gets messy
|