Not getting to the internet from other computers on network

Good day to you.
I have a small network at home and I'm having some problem
getting to the internet on 3 of the computers.
This is my setup.
I have Bellsouth DSL, coming from modem into a NIC card on
the server (This is the main connection). The server has 2
NIC card. The main connection to the internet is share
enabled. I can get to the internet using the server. The
second NIC card is coming from the server into a linksys
wireless router. The other computers that are connected to
the router can't get to the internet.

since you have a router between your server and clients, they must be in the
different subnet. If this is the case, check your outer settings.

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.

"ORANE" <(E-Mail Removed)> wrote in message
news:1a15601c41d7b$a06d5840$(E-Mail Removed)...
> Good day to you.
> I have a small network at home and I'm having some problem
> getting to the internet on 3 of the computers.
> This is my setup.
> I have Bellsouth DSL, coming from modem into a NIC card on
> the server (This is the main connection). The server has 2
> NIC card. The main connection to the internet is share
> enabled. I can get to the internet using the server. The
> second NIC card is coming from the server into a linksys
> wireless router. The other computers that are connected to
> the router can't get to the internet.

Thank you for your help, but I have another question.
As far as the router, what am I looking for? Example my
ip address coming in the modem(main Nic card) is
68.209.73.188. The second Nic card have ip of
169.xxx.xxx.xxx and the subnet mast for that one is
255.255.0.0. The Ip address for the modem 192.168.0.1.
What am I doing wrong.



>-----Original Message-----
>since you have a router between your server and clients,
they must be in the
>different subnet. If this is the case, check your outer
settings.
>
>--
>For more and other information, go to
http://www.ChicagoTech.net
>
>Don't send e-mail or reply to me except you need
consulting services.
>Posting on MS newsgroup will benefit all readers and you
may get more help.
>
>Robert Lin, MS-MVP, MCSE & CNE
>Networking, Internet, Routing, VPN, Anti-Virus, Tips &
Troubleshooting on
>http://www.ChicagoTech.net
>This posting is provided "AS IS" with no warranties.
>
>"ORANE" <(E-Mail Removed)> wrote in
message
>news:1a15601c41d7b$a06d5840$(E-Mail Removed)...
>> Good day to you.
>> I have a small network at home and I'm having some
problem
>> getting to the internet on 3 of the computers.
>> This is my setup.
>> I have Bellsouth DSL, coming from modem into a NIC card
on
>> the server (This is the main connection). The server
has 2
>> NIC card. The main connection to the internet is share
>> enabled. I can get to the internet using the server.
The
>> second NIC card is coming from the server into a linksys
>> wireless router. The other computers that are connected
to
>> the router can't get to the internet.
>
>
>.
>