In article <005201c39591$ddac29b0$(E-Mail Removed)>, "Alex"
<(E-Mail Removed)> wrote:
>I have a desktop that I just bought a wireless usb device
>for. The installation goes fine and the device
>configuration shows it is receiving a signal from the
>router in the building, however in my network neighborhood
>properties there is no TCP/IP protocol associated with the
>wireless device. (the device is there and has a netbui
>protocol, but no tcp/ip - so no internet for me) When I
>try to add a tcp/ip protocol for the usb device and click
>ok, it closes the 'protocol-selecting' pop-up without
>adding it. No error message. It just doesn't add the
>protocol at all. I've tried uninstalling/reinstalling a
>couple of times.
>
>I spent and hour on the phone with compaq and they told me
>the problem was not with the wireless device but with
>windows - something about maybe needing to reinstall
>tcp/ip stuff???
>
>Any ideas?
>-Alex
Are there TCP/IP protocol bindings for several other adapters? If so,
this Microsoft Knowledge Base article should help you solve the
problem:
Unable to Bind Protocols to More Than 5 Network Adapters
http://support.microsoft.com/default...b;en-us;217744
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)
Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.
Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com
Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm