No protocol

No protocol netbeui on add protocol. only atm call manager
and atm emulation client.

"Capy" <(E-Mail Removed)> wrote in message
news:011201c3cd8c$3c58e480$(E-Mail Removed)...
> No protocol netbeui on add protocol. only atm call manager
> and atm emulation client.


Missing Protocols:

Click Start, click Run, type MSCONFIG (hit enter).
Click the button labeled "Extract File."
For the name of the file you want to restore, type NETBW.INF.
Restore from your Windows Millennium CD (if your CD is your D: drive,
type: D:\WIN9X).
Save File In: C:\WINDOWS

Once the file is restored, repeat this process with NETTRANS.INF.

Then back in your network properties, click Add, click Protocol,
Click Add, click the Have Disk button, click the Browse button,
go to C:\Windows and on the left you should see NETTRANS.INF,
click once on it and click OK.

The missing protocols should now be available in your network
properties.



--
Best Regards,
Ron Lowe
MS-MVP Windows Networking

Hi Ron! - don't often see you inhere!

--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Season's Greetings to one and all!

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's

"Ron Lowe" <ron-msng@{d.e.l.e.t.e.}lowe-family.me.uk> wrote in message
news:(E-Mail Removed)...
> "Capy" <(E-Mail Removed)> wrote in message
> news:011201c3cd8c$3c58e480$(E-Mail Removed)...
> > No protocol netbeui on add protocol. only atm call manager
> > and atm emulation client.
>
>
> Missing Protocols:
>
> Click Start, click Run, type MSCONFIG (hit enter).
> Click the button labeled "Extract File."
> For the name of the file you want to restore, type NETBW.INF.
> Restore from your Windows Millennium CD (if your CD is your D: drive,
> type: D:\WIN9X).
> Save File In: C:\WINDOWS
>
> Once the file is restored, repeat this process with NETTRANS.INF.
>
> Then back in your network properties, click Add, click Protocol,
> Click Add, click the Have Disk button, click the Browse button,
> go to C:\Windows and on the left you should see NETTRANS.INF,
> click once on it and click OK.
>
> The missing protocols should now be available in your network
> properties.
>
>
>
> --
> Best Regards,
> Ron Lowe
> MS-MVP Windows Networking
>
>

"Noel Paton" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Hi Ron! - don't often see you inhere!
>



I 're-discovered' the group after cleaning up in OE.

It had falled down the back of a radiator, and was
lying covered in dust on the floor.

I had a quick squint around, and all seemed exactly
the same as last time I was here ;-)


--
Best Regards,
Ron Lowe
MS-MVP Windows Networking

Some things never change!<g>

--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Season's Greetings to one and all!

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's

"Ron Lowe" <ron-msng@{d.e.l.e.t.e.}lowe-family.me.uk> wrote in message
news:%(E-Mail Removed)...
> "Noel Paton" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > Hi Ron! - don't often see you inhere!
> >
>
>
>
> I 're-discovered' the group after cleaning up in OE.
>
> It had falled down the back of a radiator, and was
> lying covered in dust on the floor.
>
> I had a quick squint around, and all seemed exactly
> the same as last time I was here ;-)
>
>
> --
> Best Regards,
> Ron Lowe
> MS-MVP Windows Networking
>