No PPTP Ports in Windows SBS 2003

I have a Windows 2003 SBS server SP1 of SBS, that has no PPTP Ports displayed
in the Ports section of Routing and Remote Access. When you Right Click on
Ports and go properties, it says there is 128 Ports enabled for WAN Miniport
PPTP.
This happened about a week or so ago. Before that it worked fine using PPTP.
I went into Device Manager and Told it to show hidden devices, I then
disabled the WAN Miniport for PPTP and then restarted RRAS service, then
stopped RRAS and reenabled the Device then started RRAS, still no go.

Any suggestions or ideas.

You may want to re-install WAN Miniport. This post may help.

RESOLVED: Network Wizard only ...The solution involved reinstalling the WAN Miniport (PPTP) driver. Here's how I did it: 1. Go to device manager and select "Show Hidden Devices" under the ...
http://www.chicagotech.net/netforums...0160d994ee7523


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"CLarke" <(E-Mail Removed)> wrote in message news:C9340BA8-7CE5-4A64-A85C-(E-Mail Removed)...
I have a Windows 2003 SBS server SP1 of SBS, that has no PPTP Ports displayed
in the Ports section of Routing and Remote Access. When you Right Click on
Ports and go properties, it says there is 128 Ports enabled for WAN Miniport
PPTP.
This happened about a week or so ago. Before that it worked fine using PPTP.
I went into Device Manager and Told it to show hidden devices, I then
disabled the WAN Miniport for PPTP and then restarted RRAS service, then
stopped RRAS and reenabled the Device then started RRAS, still no go.

Any suggestions or ideas.