No power to Linksys WPC11

Installed Linksys WPC11 v.4 according to instuctions.
Unistalled and reinstalled 4-5 times. Reinstalled a clean
copy of Win 98 SE. No power LED indication on PC Card.
Even took back card to store and got a replacement
thinking card was faulty. New card gives me the same
problem. The WLAN monitor, reports that my "WPC11 is not
installed". I can't think of anything else to do. Thanks
in advance for any help.

does your PCMCIA slot are alive?
can you use any other card on your PCMCIA slot?
Does your PCMCIA port support cardbus?

anyway what is your PC spec or maker and model?


"Dale G." <(E-Mail Removed)> wrote in message news:00ea01c3de56$79760fc0$(E-Mail Removed)...
> Installed Linksys WPC11 v.4 according to instuctions.
> Unistalled and reinstalled 4-5 times. Reinstalled a clean
> copy of Win 98 SE. No power LED indication on PC Card.
> Even took back card to store and got a replacement
> thinking card was faulty. New card gives me the same
> problem. The WLAN monitor, reports that my "WPC11 is not
> installed". I can't think of anything else to do. Thanks
> in advance for any help.

Both slots work with my ethernet/modem card and it works
with the wired part of my home network.
I don't know about support for cardbus.
Pansonic CF-62

>-----Original Message-----
>does your PCMCIA slot are alive?
>can you use any other card on your PCMCIA slot?
>Does your PCMCIA port support cardbus?
>
>anyway what is your PC spec or maker and model?
>
>
>"Dale G." <(E-Mail Removed)> wrote in
message news:00ea01c3de56$79760fc0$(E-Mail Removed)...
>> Installed Linksys WPC11 v.4 according to instuctions.
>> Unistalled and reinstalled 4-5 times. Reinstalled a
clean
>> copy of Win 98 SE. No power LED indication on PC Card.
>> Even took back card to store and got a replacement
>> thinking card was faulty. New card gives me the same
>> problem. The WLAN monitor, reports that my "WPC11 is
not
>> installed". I can't think of anything else to do.
Thanks
>> in advance for any help.
>
>
>.
>

Does your PC qualify minimum requirement?
I couldn't find your pc spec.

Here is minimum requirement from linksys spec note

One PC (200MHz or Faster Processor) with:

.. 64MB RAM or Better

.. Available 32-bit CardBus Slot

.. CD-ROM Drive

.. Windows 98SE/Me/2000/XP


also you can call panasonic tech support and linksys tech support.

I think you better to call panasonic tech support to find compatibility.


"Dale" <(E-Mail Removed)> wrote in message news:044701c3de60$83de3370$(E-Mail Removed)...
> Both slots work with my ethernet/modem card and it works
> with the wired part of my home network.
> I don't know about support for cardbus.
> Pansonic CF-62
>
> >-----Original Message-----
> >does your PCMCIA slot are alive?
> >can you use any other card on your PCMCIA slot?
> >Does your PCMCIA port support cardbus?
> >
> >anyway what is your PC spec or maker and model?
> >
> >
> >"Dale G." <(E-Mail Removed)> wrote in
> message news:00ea01c3de56$79760fc0$(E-Mail Removed)...
> >> Installed Linksys WPC11 v.4 according to instuctions.
> >> Unistalled and reinstalled 4-5 times. Reinstalled a
> clean
> >> copy of Win 98 SE. No power LED indication on PC Card.
> >> Even took back card to store and got a replacement
> >> thinking card was faulty. New card gives me the same
> >> problem. The WLAN monitor, reports that my "WPC11 is
> not
> >> installed". I can't think of anything else to do.
> Thanks
> >> in advance for any help.
> >
> >
> >.
> >