No ping IP Public from outside but RDC works with the same public

Hi guys, I have 2 nics in my Windows 2003 Server SBS (WAN and LAN) I cant
ping my public ip on my server or go to the default website IIS when I am
outside of my office but I can use RDC to my server.

I already point my WWW and MX Mail to the public IP but it doesnt work

Thanks

Maybe the NAT block ping? Can you telnet port 80 from outside?

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"Gio21" <(E-Mail Removed)> wrote in message
news:2874E9F7-038B-488F-9B6F-(E-Mail Removed)...
> Hi guys, I have 2 nics in my Windows 2003 Server SBS (WAN and LAN) I cant
> ping my public ip on my server or go to the default website IIS when I am
> outside of my office but I can use RDC to my server.
>
> I already point my WWW and MX Mail to the public IP but it doesnt work
>
> Thanks

I am trying it but it fails. How can ublock Ping form NAT? thanks a lot

C:\Documents and Settings\Gio>telnet www.rodriguezllawfirm.com 80
Connecting To www.rodriguezllawfirm.com...Could not open connection to the
host,
on port 80: Connect failed

C:\Documents and Settings\Gio>telnet 65.100.168.137 80
Connecting To 65.100.168.137...Could not open connection to the host, on
port 80
: Connect failed


"Robert L. (MS-MVP)" wrote:

> Maybe the NAT block ping? Can you telnet port 80 from outside?
>
> --
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on
> http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on
> http://www.HowToNetworking.com
>
>
> "Gio21" <(E-Mail Removed)> wrote in message
> news:2874E9F7-038B-488F-9B6F-(E-Mail Removed)...
> > Hi guys, I have 2 nics in my Windows 2003 Server SBS (WAN and LAN) I cant
> > ping my public ip on my server or go to the default website IIS when I am
> > outside of my office but I can use RDC to my server.
> >
> > I already point my WWW and MX Mail to the public IP but it doesnt work
> >
> > Thanks
>

You may need to enable ICMP on the NAT. This how to may help.

NAT and FirewallHow to configure 2000/2003 NAT services and ports NAT server
can assign IP No one can access our website behind NAT Port forwarding on
Windows 2003 with two ...
www.chicagotech.net/nat.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"Gio21" <(E-Mail Removed)> wrote in message
news16A77A0-AA35-433B-8F2A-(E-Mail Removed)...
>I am trying it but it fails. How can ublock Ping form NAT? thanks a lot
>
> C:\Documents and Settings\Gio>telnet www.rodriguezllawfirm.com 80
> Connecting To www.rodriguezllawfirm.com...Could not open connection to the
> host,
> on port 80: Connect failed
>
> C:\Documents and Settings\Gio>telnet 65.100.168.137 80
> Connecting To 65.100.168.137...Could not open connection to the host, on
> port 80
> : Connect failed
>
>
> "Robert L. (MS-MVP)" wrote:
>
>> Maybe the NAT block ping? Can you telnet port 80 from outside?
>>
>> --
>> Bob Lin, MS-MVP, MCSE & CNE
>> Networking, Internet, Routing, VPN Troubleshooting on
>> http://www.ChicagoTech.net
>> How to Setup Windows, Network, VPN & Remote Access on
>> http://www.HowToNetworking.com
>>
>>
>> "Gio21" <(E-Mail Removed)> wrote in message
>> news:2874E9F7-038B-488F-9B6F-(E-Mail Removed)...
>> > Hi guys, I have 2 nics in my Windows 2003 Server SBS (WAN and LAN) I
>> > cant
>> > ping my public ip on my server or go to the default website IIS when I
>> > am
>> > outside of my office but I can use RDC to my server.
>> >
>> > I already point my WWW and MX Mail to the public IP but it doesnt work
>> >
>> > Thanks
>>