no network provider accepted the given path

This is the error message I get when trying to access xp machines from
my server.

The topology is as follows:

Server (2003 domain controller) is on 192.168.1.X network, hosted in
server farm.

XP machines 10.X.X.X office network.


I have an up and running IPSEC tunnel between the two networks. I can
ping from each network, and I can view the net shares from the XP
machines to the server, but not the other way around.

So to sum things up:
>From the server, if i try to access my XP machines (all of them)
through FQDN OR through IP address (\\machinename OR \\IP) I get "no
network provider accepted the given path".

Looks like anything that has to do with TCP is blocked. (because even
trying to see the http printer host - is not possible)

Any help would be appreciated.
Thanks.

Have you enabled file and printer? Have you enable file and printer sharing in the windows firewall. These search results may help,

No network provider accepted the given network pathNo network provider accepted the given network path. System error 67 has occurred. The network name cannot be found. Symptoms: 1. You can access the shared ...
http://www.chicagotech.net/troublesh...temerror67.htm

How to enable windows sharing
Domain network sharing - Macintosh file sharing ... Sharing Printers and Files over a private network · Internet access sharing. Remote Access ...
http://www.howtonetworking.com/Netwo...lesharing0.htm

How to enable File and Sharing in Windows Firewall
Cause: A firewall is blocking the File and Printer Sharing. Solution: You may need to enable File and Printer Sharing in Windows Firewall. ...
www.howtonetworking.com/Windows/xpicf1.htm



Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Mman" <(E-Mail Removed)> wrote in message news:(E-Mail Removed) ups.com...
This is the error message I get when trying to access xp machines from
my server.

The topology is as follows:

Server (2003 domain controller) is on 192.168.1.X network, hosted in
server farm.

XP machines 10.X.X.X office network.


I have an up and running IPSEC tunnel between the two networks. I can
ping from each network, and I can view the net shares from the XP
machines to the server, but not the other way around.

So to sum things up:
>From the server, if i try to access my XP machines (all of them)
through FQDN OR through IP address (\\machinename OR \\IP) I get "no
network provider accepted the given path".

Looks like anything that has to do with TCP is blocked. (because even
trying to see the http printer host - is not possible)

Any help would be appreciated.
Thanks.