No more External Access Win2k3

I have a Win2k3 installed as web server, routing & remote access server. It
was working smoothly until I reconfigured "Routing & remote access" (disable
and enable, but nothing else changed). Now the Win2K3 server can provide
services to "Internal Access", everything works, the problem is no more
"External Access" (from Internet) service seems to be provided, even Remote
deskop.

The server can be pinged from Internet, basic firewall was not activated,
only NAT is activated. I am very confused what happened, anyway I am not good
at networking.

Any comments will be greate appreciated.

I would check the NAT settings.

--
For more and other information, go to http://www.ChicagoTech.net


Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.


Bob Lin, MS-MVP, MCSE & CNE

Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.

"Jinsong" <(E-Mail Removed)> wrote in message
news:1728037B-54D8-47AD-9051-(E-Mail Removed)...
>I have a Win2k3 installed as web server, routing & remote access server. It
> was working smoothly until I reconfigured "Routing & remote access"
> (disable
> and enable, but nothing else changed). Now the Win2K3 server can provide
> services to "Internal Access", everything works, the problem is no more
> "External Access" (from Internet) service seems to be provided, even
> Remote
> deskop.
>
> The server can be pinged from Internet, basic firewall was not activated,
> only NAT is activated. I am very confused what happened, anyway I am not
> good
> at networking.
>
> Any comments will be greate appreciated.

See the link below on how to configure NAT/basic firewall. You should double
check that you have configured exceptions for your web server and Remote
Desktop in the Service and Ports section. You may also want to se if any
packet filtering is enabled on the external nic for internet access in the
IP routing/general - adapter/properties - input and output filters. ---
Steve

http://www.wown.com/articles_tutoria...iguration.html

"Jinsong" <(E-Mail Removed)> wrote in message
news:1728037B-54D8-47AD-9051-(E-Mail Removed)...
>I have a Win2k3 installed as web server, routing & remote access server. It
> was working smoothly until I reconfigured "Routing & remote access"
> (disable
> and enable, but nothing else changed). Now the Win2K3 server can provide
> services to "Internal Access", everything works, the problem is no more
> "External Access" (from Internet) service seems to be provided, even
> Remote
> deskop.
>
> The server can be pinged from Internet, basic firewall was not activated,
> only NAT is activated. I am very confused what happened, anyway I am not
> good
> at networking.
>
> Any comments will be greate appreciated.