No LAN ping

I have a simple home system with CM - WRT54g - 2 wired clients - 1 WPC54g.
Fixed IP on all 3) W2K clients and everything networks properly.

Ping from any client to client results in a time out response.
Pings out through WAN work properly.
Is there a setting in the WRT I've missed?

WRT has 3.03 firmware and a local IP 192.168.1.1
Network DHCP is Enabled
Starting IP 192.168.1.100
Clients are set to 192.168.1.101 to 103

3 days of Google has not helped.

Thanks for any suggestions.
M2

"M2" <(E-Mail Removed)> wrote in
news:yKhee.602$(E-Mail Removed):

> I have a simple home system with CM - WRT54g - 2 wired clients - 1
> WPC54g. Fixed IP on all 3) W2K clients and everything networks
> properly.
>
> Ping from any client to client results in a time out response.
> Pings out through WAN work properly.
> Is there a setting in the WRT I've missed?
>
> WRT has 3.03 firmware and a local IP 192.168.1.1
> Network DHCP is Enabled
> Starting IP 192.168.1.100
> Clients are set to 192.168.1.101 to 103
>
> 3 days of Google has not helped.
>
> Thanks for any suggestions.
> M2
>
>
>

I do hope you know that if the machines have FW(s) on them active and you
have not set the FW(s) to allow Windows networking on the required ports,
there is not going to be any traffic allowed between the machines until the
FW(s) are configured. If there are FW(s) active, then drop them to see if
the ping works.

Duane

That was it!
I missed this because McAfee was not giving me any alerts and allowing
normal network traffic - just no pings.
Thanks..........
"Duane Arnold" <(E-Mail Removed)> wrote in message
news:Xns964D10CD33AC9notmenotmecom@204.127.199.17. ..
> "M2" <(E-Mail Removed)> wrote in
> news:yKhee.602$(E-Mail Removed):
>
> > I have a simple home system with CM - WRT54g - 2 wired clients - 1
> > WPC54g. Fixed IP on all 3) W2K clients and everything networks
> > properly.
> >
> > Ping from any client to client results in a time out response.
> > Pings out through WAN work properly.
> > Is there a setting in the WRT I've missed?
> >
> > WRT has 3.03 firmware and a local IP 192.168.1.1
> > Network DHCP is Enabled
> > Starting IP 192.168.1.100
> > Clients are set to 192.168.1.101 to 103
> >
> > 3 days of Google has not helped.
> >
> > Thanks for any suggestions.
> > M2
> >
> >
> >
>
> I do hope you know that if the machines have FW(s) on them active and you
> have not set the FW(s) to allow Windows networking on the required ports,
> there is not going to be any traffic allowed between the machines until
the
> FW(s) are configured. If there are FW(s) active, then drop them to see if
> the ping works.
>
> Duane

"M2" <(E-Mail Removed)> wrote in
news:SCqee.626$(E-Mail Removed):

> That was it!
> I missed this because McAfee was not giving me any alerts and allowing
> normal network traffic - just no pings.
> Thanks..........
>

I am gald I could help. ;-)

Duane