no LAN connection after resume from hibernate or standby...

I've been Googling on it but, still don't really no where to start.
Asrock ALivNF6P motherboard with LAN, and after it goes to standby or
hibernate,
LAN connection doesn't recover, just flashes at you in the system tray, and
have to reboot to get it back.
The owner has a Linksys WAG354G, (same as mine btw!).
I've gone into Device Manager and removed the tick for "Allow Windows to
Switch of this device to save power," for the LAN chip.

any pointers gratefully received.

regards, Richard

Is it Vista? Have you checked if there is a new driver for the NIC?

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"RJK" <(E-Mail Removed)> wrote in message
news:e1xlnNP%(E-Mail Removed)...
> I've been Googling on it but, still don't really no where to start.
> Asrock ALivNF6P motherboard with LAN, and after it goes to standby or
> hibernate,
> LAN connection doesn't recover, just flashes at you in the system tray,
> and have to reboot to get it back.
> The owner has a Linksys WAG354G, (same as mine btw!).
> I've gone into Device Manager and removed the tick for "Allow Windows to
> Switch of this device to save power," for the LAN chip.
>
> any pointers gratefully received.
>
> regards, Richard
>

Hi
In the connection properties click on the Configuration of the Card and see
if there is Power saving setting there as well.
http://www.ezlan.net/example/powersave.jpg
Jack (MS, MVP-Networking)

"RJK" <(E-Mail Removed)> wrote in message
news:e1xlnNP%(E-Mail Removed)...
> I've been Googling on it but, still don't really no where to start.
> Asrock ALivNF6P motherboard with LAN, and after it goes to standby or
> hibernate,
> LAN connection doesn't recover, just flashes at you in the system tray,
> and have to reboot to get it back.
> The owner has a Linksys WAG354G, (same as mine btw!).
> I've gone into Device Manager and removed the tick for "Allow Windows to
> Switch of this device to save power," for the LAN chip.
>
> any pointers gratefully received.
>
> regards, Richard
>

I'm on another ALiveNF6P at home, ...and your right - there is another
setting in the LAN connection Properties, ...he'll be SO pleased when I tell
him tommorow,
....HUGE thanks.

regards, Richard


"Jack (MVP-Networking)." <(E-Mail Removed)> wrote in message
news:O2VwK1Z%(E-Mail Removed)...
> Hi
> In the connection properties click on the Configuration of the Card and
> see if there is Power saving setting there as well.
> http://www.ezlan.net/example/powersave.jpg
> Jack (MS, MVP-Networking)
>
> "RJK" <(E-Mail Removed)> wrote in message
> news:e1xlnNP%(E-Mail Removed)...
>> I've been Googling on it but, still don't really no where to start.
>> Asrock ALivNF6P motherboard with LAN, and after it goes to standby or
>> hibernate,
>> LAN connection doesn't recover, just flashes at you in the system tray,
>> and have to reboot to get it back.
>> The owner has a Linksys WAG354G, (same as mine btw!).
>> I've gone into Device Manager and removed the tick for "Allow Windows to
>> Switch of this device to save power," for the LAN chip.
>>
>> any pointers gratefully received.
>>
>> regards, Richard
>>
>

Ooops, typical me, only telling half a story, tiz XP Home ed. on all
machines,
....pretty sure Jack nailed it, i.e. 2nd "power Saving" stting, ...will know
tommorrow.

regards, Richard


"Robert L. (MS-MVP)" <(E-Mail Removed)> wrote in message
news:urQgGyW%(E-Mail Removed)...
> Is it Vista? Have you checked if there is a new driver for the NIC?
>
> --
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on
> http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on
> http://www.HowToNetworking.com
> "RJK" <(E-Mail Removed)> wrote in message
> news:e1xlnNP%(E-Mail Removed)...
>> I've been Googling on it but, still don't really no where to start.
>> Asrock ALivNF6P motherboard with LAN, and after it goes to standby or
>> hibernate,
>> LAN connection doesn't recover, just flashes at you in the system tray,
>> and have to reboot to get it back.
>> The owner has a Linksys WAG354G, (same as mine btw!).
>> I've gone into Device Manager and removed the tick for "Allow Windows to
>> Switch of this device to save power," for the LAN chip.
>>
>> any pointers gratefully received.
>>
>> regards, Richard
>>
>

mmm, ...how'd I suddenly become "Eulsive" ?
....have edited account, sorry about that !

regards, Richard


"Elusive" <(E-Mail Removed)> wrote in message
news:uOgTFka%(E-Mail Removed)...
> I'm on another ALiveNF6P at home, ...and your right - there is another
> setting in the LAN connection Properties, ...he'll be SO pleased when I
> tell him tommorow,
> ...HUGE thanks.
>
> regards, Richard
>
>
> "Jack (MVP-Networking)." <(E-Mail Removed)> wrote in message
> news:O2VwK1Z%(E-Mail Removed)...
>> Hi
>> In the connection properties click on the Configuration of the Card and
>> see if there is Power saving setting there as well.
>> http://www.ezlan.net/example/powersave.jpg
>> Jack (MS, MVP-Networking)
>>
>> "RJK" <(E-Mail Removed)> wrote in message
>> news:e1xlnNP%(E-Mail Removed)...
>>> I've been Googling on it but, still don't really no where to start.
>>> Asrock ALivNF6P motherboard with LAN, and after it goes to standby or
>>> hibernate,
>>> LAN connection doesn't recover, just flashes at you in the system tray,
>>> and have to reboot to get it back.
>>> The owner has a Linksys WAG354G, (same as mine btw!).
>>> I've gone into Device Manager and removed the tick for "Allow Windows to
>>> Switch of this device to save power," for the LAN chip.
>>>
>>> any pointers gratefully received.
>>>
>>> regards, Richard
>>>
>>
>
>

....apologies about that, ..who's been on this blooming machine ? !!!

regards, Richard


"Elusive" <(E-Mail Removed)> wrote in message
news:efzOFla%(E-Mail Removed)...
> Ooops, typical me, only telling half a story, tiz XP Home ed. on all
> machines,
> ...pretty sure Jack nailed it, i.e. 2nd "power Saving" stting, ...will
> know tommorrow.
>
> regards, Richard
>
>
> "Robert L. (MS-MVP)" <(E-Mail Removed)> wrote in message
> news:urQgGyW%(E-Mail Removed)...
>> Is it Vista? Have you checked if there is a new driver for the NIC?
>>
>> --
>> Bob Lin, MS-MVP, MCSE & CNE
>> Networking, Internet, Routing, VPN Troubleshooting on
>> http://www.ChicagoTech.net
>> How to Setup Windows, Network, VPN & Remote Access on
>> http://www.HowToNetworking.com
>> "RJK" <(E-Mail Removed)> wrote in message
>> news:e1xlnNP%(E-Mail Removed)...
>>> I've been Googling on it but, still don't really no where to start.
>>> Asrock ALivNF6P motherboard with LAN, and after it goes to standby or
>>> hibernate,
>>> LAN connection doesn't recover, just flashes at you in the system tray,
>>> and have to reboot to get it back.
>>> The owner has a Linksys WAG354G, (same as mine btw!).
>>> I've gone into Device Manager and removed the tick for "Allow Windows to
>>> Switch of this device to save power," for the LAN chip.
>>>
>>> any pointers gratefully received.
>>>
>>> regards, Richard
>>>
>>
>
>