nlbm multiple card

hi,
I setup a 2003 with 2 eth in this way
cluster1 ip10.0.0.3 su scheda 10.0.0.5
cluster2 ip10.0.0.4 su scheda 10.0.0.6

but i want:

Cluster ip 10.0.0.3 with eth10...5 and 6, i cant understand how i can
add a second card to the cluster ;(
if possible to have a 200mb using 2 card on 1 cluster ??

From the Nlbm Help:

Multiple network adaptersNetwork Load balancing can use multiple network
adapters in two different and distinct ways. The first use is to create
multiple Network Load Balancing clusters; achieved by binding Network
Load Balancing to each of the multiple adapters.

The second use for multiple network adapters is to use one or more
adapters for handling cluster traffic, but also configure at least one
adapter to be used for server management. The management adapter does
not handle cluster traffic. Further information on this this second use
of multiple network adapters is described below.

ok but for the second..... how to.....
guydo ha scritto:

> hi,
> I setup a 2003 with 2 eth in this way
> cluster1 ip10.0.0.3 su scheda 10.0.0.5
> cluster2 ip10.0.0.4 su scheda 10.0.0.6
>
> but i want:
>
> Cluster ip 10.0.0.3 with eth10...5 and 6, i cant understand how i can
> add a second card to the cluster ;(
> if possible to have a 200mb using 2 card on 1 cluster ??
>