Newtowrk Bridge WIN2000 Server

I have 2 indentical NIC's in my WIN2000 server, and now I would like to bridge them , ie same IP

Tks

Rusty,

This is a feature provided by the NIC manufacturer's driver (and is not
supported by all NICs). Each manufacturer configures adapter teaming
differently and you will need to refer to the manufacturer's documentation.

------------------------------------------------------------------
Mike Aubert
MCSE, MCSD, MCDBA
(E-Mail Removed)

Note the "news2" in my email address is temporary and may be changed in the
future, remove it to email me at my Permanente address.
This posting is provided "AS IS" with no warranties, and confers no rights.


"Rusty" <(E-Mail Removed)> wrote in message
news:46C775C5-67E0-490C-BF22-(E-Mail Removed)...
> I have 2 indentical NIC's in my WIN2000 server, and now I would like to
bridge them , ie same IP.
>
> Tks

Windows 2000 does not have this feature. Some NIC manufacturers include
teaming NICs and teaming software that runs on Windows 2000. Check with the
vendor of your NICs.


--

Thanks,
Marc Reynolds
Microsoft Technical Support

This posting is provided "AS IS" with no warranties, and confers no rights.


"Rusty" <(E-Mail Removed)> wrote in message
news:46C775C5-67E0-490C-BF22-(E-Mail Removed)...
> I have 2 indentical NIC's in my WIN2000 server, and now I would like to
bridge them , ie same IP.
>
> Tks