New Server 2003 cant see other machines on LAN

I've setup a Windows 2003 server and find I can't see other machines on the
LAN.

I believe I went through the process of applying the Updates while in that
start-up protected mode and opened up the machine correctly. However, all I
can see (and ping) is myself and the router and everything on the internet.
I can't see anything else on the LAN.

The addressing on the NIC card looks normal. I even took the step of
configuring a XP machine with the same addressing and it works fine.

I assume I need to re-run the wizard that takes it out of that start-up
protected mode but I can't locate it. Is the wizard available to run? Is
there a firewall setting? or a group setting that would account for such a
behavoir?

Posting the results of this computer and other computer ipconfig /all here may help.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"jepp" <(E-Mail Removed)> wrote in message news:6D9B38B3-4480-4EA5-9C7C-(E-Mail Removed)...
I've setup a Windows 2003 server and find I can't see other machines on the
LAN.

I believe I went through the process of applying the Updates while in that
start-up protected mode and opened up the machine correctly. However, all I
can see (and ping) is myself and the router and everything on the internet.
I can't see anything else on the LAN.

The addressing on the NIC card looks normal. I even took the step of
configuring a XP machine with the same addressing and it works fine.

I assume I need to re-run the wizard that takes it out of that start-up
protected mode but I can't locate it. Is the wizard available to run? Is
there a firewall setting? or a group setting that would account for such a
behavoir?

If I'm on the wrong track say so.

I do know how to configure a NIC card, this is not that.

This is something unique to the firewall or the server. I assume most
people don't end up here so re-running the final wizard(s) will probably do
the trick

"Robert L [MS-MVP]" wrote:

> Posting the results of this computer and other computer ipconfig /all here may help.
>
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
> "jepp" <(E-Mail Removed)> wrote in message news:6D9B38B3-4480-4EA5-9C7C-(E-Mail Removed)...
> I've setup a Windows 2003 server and find I can't see other machines on the
> LAN.
>
> I believe I went through the process of applying the Updates while in that
> start-up protected mode and opened up the machine correctly. However, all I
> can see (and ping) is myself and the router and everything on the internet.
> I can't see anything else on the LAN.
>
> The addressing on the NIC card looks normal. I even took the step of
> configuring a XP machine with the same addressing and it works fine.
>
> I assume I need to re-run the wizard that takes it out of that start-up
> protected mode but I can't locate it. Is the wizard available to run? Is
> there a firewall setting? or a group setting that would account for such a
> behavoir?
>
>