New MN-700 Update

I just did the update for the MN-700 and i rebooted and i
still do not have loopback support. I still could not
check and kind of port forwarding within my own network.
Anyone have any ideas why?

What's your firmware version? Did you download the update from

http://www.microsoft.com/hardware/br...Downloads.aspx

or from

MSBNDownload (This is the update package. It will update software
(including drivers) and firmware as needed)

http://download.microsoft.com/downlo...BNDownload.exe

(note that this URL is very long and might get truncated)?

I bet it was the first one as it doesn't have loopback support and only
upgrades the firmware to .333.

Jeff wrote:

> I just did the update for the MN-700 and i rebooted and i
> still do not have loopback support. I still could not
> check and kind of port forwarding within my own network.
> Anyone have any ideas why?

i downloaded from the second link there. the software
package. and yes it is version .333. anymore ideas?


>-----Original Message-----
>What's your firmware version? Did you download the
update from
>
>http://www.microsoft.com/hardware/br...etworking/15_D
ownloads.aspx
>
>or from
>
>MSBNDownload (This is the update package. It will update
software
>(including drivers) and firmware as needed)
>
>http://download.microsoft.com/download/8/d/5/8d5f3570-
e0aa-4ac4-8448-579870373a0f/MSBNDownload.exe
>
>(note that this URL is very long and might get truncated)?
>
>I bet it was the first one as it doesn't have loopback
support and only
>upgrades the firmware to .333.
>
>Jeff wrote:
>
>> I just did the update for the MN-700 and i rebooted and
i
>> still do not have loopback support. I still could not
>> check and kind of port forwarding within my own
network.
>> Anyone have any ideas why?
>
>.
>

Did you run both installs where it offered to update the firmware it
should have told you what the current version is. It is 2.01.02.0590.
You may have a corrupt download.

I'd suggest cleaning out your temp folder. Run "%temp%" (without the
quotes) & delete everything in the folder that opens up.

That might just fix that issue for you.

Jeff wrote:
> i downloaded from the second link there. the software
> package. and yes it is version .333. anymore ideas?
>
>
>
>>-----Original Message-----
>>What's your firmware version? Did you download the
>
> update from
>
>>http://www.microsoft.com/hardware/br...etworking/15_D
>
> ownloads.aspx
>
>>or from
>>
>>MSBNDownload (This is the update package. It will update
>
> software
>
>>(including drivers) and firmware as needed)
>>
>>http://download.microsoft.com/download/8/d/5/8d5f3570-
>
> e0aa-4ac4-8448-579870373a0f/MSBNDownload.exe
>
>>(note that this URL is very long and might get truncated)?
>>
>>I bet it was the first one as it doesn't have loopback
>
> support and only
>
>>upgrades the firmware to .333.
>>
>>Jeff wrote:
>>
>>
>>>I just did the update for the MN-700 and i rebooted and
>
> i
>
>>>still do not have loopback support. I still could not
>>>check and kind of port forwarding within my own
>
> network.
>
>>>Anyone have any ideas why?
>>
>>.
>>

Thanks i will try that next. i will let you know.


>-----Original Message-----
>Did you run both installs where it offered to update the
firmware it
>should have told you what the current version is. It is
2.01.02.0590.
>You may have a corrupt download.
>
>I'd suggest cleaning out your temp folder. Run "%temp%"
(without the
>quotes) & delete everything in the folder that opens up.
>
>That might just fix that issue for you.
>
>Jeff wrote:
>> i downloaded from the second link there. the software
>> package. and yes it is version .333. anymore ideas?
>>
>>
>>
>>>-----Original Message-----
>>>What's your firmware version? Did you download the
>>
>> update from
>>
>>>http://www.microsoft.com/hardware/br...dnetworking/15
_D
>>
>> ownloads.aspx
>>
>>>or from
>>>
>>>MSBNDownload (This is the update package. It will
update
>>
>> software
>>
>>>(including drivers) and firmware as needed)
>>>
>>>http://download.microsoft.com/download/8/d/5/8d5f3570-
>>
>> e0aa-4ac4-8448-579870373a0f/MSBNDownload.exe
>>
>>>(note that this URL is very long and might get
truncated)?
>>>
>>>I bet it was the first one as it doesn't have loopback
>>
>> support and only
>>
>>>upgrades the firmware to .333.
>>>
>>>Jeff wrote:
>>>
>>>
>>>>I just did the update for the MN-700 and i rebooted
and
>>
>> i
>>
>>>>still do not have loopback support. I still could not
>>>>check and kind of port forwarding within my own
>>
>> network.
>>
>>>>Anyone have any ideas why?
>>>
>>>.
>>>
>
>.
>

Thanks a lot that worked. Apreciate it.


>-----Original Message-----
>Thanks i will try that next. i will let you know.
>
>
>>-----Original Message-----
>>Did you run both installs where it offered to update the
>firmware it
>>should have told you what the current version is. It is
>2.01.02.0590.
>>You may have a corrupt download.
>>
>>I'd suggest cleaning out your temp folder. Run "%temp%"
>(without the
>>quotes) & delete everything in the folder that opens up.
>>
>>That might just fix that issue for you.
>>
>>Jeff wrote:
>>> i downloaded from the second link there. the software
>>> package. and yes it is version .333. anymore ideas?
>>>
>>>
>>>
>>>>-----Original Message-----
>>>>What's your firmware version? Did you download the
>>>
>>> update from
>>>
>>>>http://www.microsoft.com/hardware/broadbandnetworking/1
5
>_D
>>>
>>> ownloads.aspx
>>>
>>>>or from
>>>>
>>>>MSBNDownload (This is the update package. It will
>update
>>>
>>> software
>>>
>>>>(including drivers) and firmware as needed)
>>>>
>>>>http://download.microsoft.com/download/8/d/5/8d5f3570-
>>>
>>> e0aa-4ac4-8448-579870373a0f/MSBNDownload.exe
>>>
>>>>(note that this URL is very long and might get
>truncated)?
>>>>
>>>>I bet it was the first one as it doesn't have loopback
>>>
>>> support and only
>>>
>>>>upgrades the firmware to .333.
>>>>
>>>>Jeff wrote:
>>>>
>>>>
>>>>>I just did the update for the MN-700 and i rebooted
>and
>>>
>>> i
>>>
>>>>>still do not have loopback support. I still could
not
>>>>>check and kind of port forwarding within my own
>>>
>>> network.
>>>
>>>>>Anyone have any ideas why?
>>>>
>>>>.
>>>>
>>
>>.
>>
>.
>